Adhesive: Promask3 H2O Masking Tape Green

£1.30 (excl. VAT)

Choose a Colour

Description:

Green masking tape is water-resistant and can sit in an 80°C oven for up to one hour. It has excellent adhesion with easy application to curved profiles and irregular surfaces. It’s easy to remove, leaving no residue. The adhesion is made up of natural rubber and hydrocarbon resins and the backing saturated water-resistant crepe paper.

• Premium water resist paper

• Excellent adhesion to most surfaces

• Easy application on curved profiles and irregular surfaces

• Easy removal

Sizes:

24mm
38mm
48mm

Box:

24mm x 45m - 36 rolls
38mm x 45m - 24 rolls
48mm x 45m - 20 rolls

Adhesive: Promask3 H2O Masking Tape Green

Primer: Mipa 4+1 Acrylic Filler Primer 4 Litre Kit

£54.16 (excl. VAT)

Choose a Colour

Description for 4+1 Primer

Mipa 4+1 Acrylfiller HS has very good filling properties and is very easy to sand. This filler can be used as compact as well as high-build filler.

The combination with Mipa 2K-Reaktivzusatz VR allows a very quick processing followed by heat-drying or drying at room temperature.

This offers saving potentials in terms of spray booth occupancy, stoving times as well as working time. It is also suitable to fill partial areas (Spot repair) without sinkage or visible marks in the outer rim.

Another application option when using Mipa 2K Reaktivzusatz VR is the wet-on-wet application, after which the surface can be overcoated after only a very short intermediate drying of only 10 minutes at room temperature.

Spreading rate: 5,0 - 6,0 m²/l (for 50 - 80 µm DFT)

Description for H5 Hardener

Mipa 2K H5 extra fast acrylic hardener, specially developed to be used in conjunction with Mipa 2K primers.

Mixing ratio 4:1 by volume

Primer: Mipa 4+1 Acrylic Filler Primer 4 Litre Kit

Cleaning: Nitrile Disposable Gloves

£8.00 £5.00 (excl. VAT) Save £3.00

Choose a Colour

Superior 5 mil thickness at a previously unachievable price point
Provide extra comfort and flexibility
Beaded cuff for ease of donning
Micro-textured for improved grip
Ambidextrous allowing easy movement on both hands
Provide excellent protection from blood-borne diseases making them ideal for medical use, but can be used across a wide range of industries
Chemical resistant to EN374-2 and EN374-3
Conform to EN1186 - approved for food contact
Latex and powder free
AQL 1.5 medical grade
Typical applications: automotive, care, tattoo, food handling, laboratory and hairdressing industries

Abrasive: Abrasive Rolls

£35.00 £29.16 (excl. VAT) Save £5.84

Choose a Colour

Description

Mirka Goldflex Soft

One of the best foam backed abrasives on the market, Manufactured using a flexible c-weight latex paper, Goldflex is ideal for sanding most timbers and for fine finishing operations on paints and lacquers. The foam backing is easy to grip and assists in application of uniform pressure. The special stearate coating prevents clogging and means this product can be used wet or dry.

Grits Available:

180
240
400

Pad size 115 x 125mm. 200 Pads per roll

Norton Rotolo Foam - Soft Abrasive Sheets Perforated Rolls 115x25m

Simular to Mirka Goldflex

For Outstanding Finishes

Rotolo Foam pre-cut sheets, conveniently packaged in a roll form, are ideal for fine sanding on round edges, contours and curves, providing an outstanding finish on primers and top coats. Perforated every 5-1/2". The secret of Rotolo Foam lies in the combination of A275 sandpaper and the special Rotolo foam backing.

Norton Rotolo Foam - Soft Abrasive Sheets Perforated Rolls 115x25m

Simular to Mirka Goldflex

For Outstanding Finishes
Rotolo Foam pre-cut sheets, conveniently packaged in a roll form, are ideal for fine sanding on round edges, contours and curves, providing an outstanding finish on primers and top coats. Perforated every 5-1/2". The secret of Rotolo Foam lies in the combination of A275 sandpaper and the special Rotolo foam backing.

Features
Benefits
A275 on foam backing
Perfect for hand sanding primer without leaving finger marks
Fast cut and long life without loading
Eliminates finger marks
Ideal for waterborne
Water resistant
Can be used moist
Uniform finish
Minimize "difficult to cover" sand scratches that prove challenging for waterbase paints.

Grits Available:

120
240
320
400
600

SIA SIANET 70MM X 10M NET ABRASIVE /SANDING ROLL

Sianet is Sia abrasives answer to Mirka's Abranet. Made from a knitted fabric to create this excellent net abrasive using Blue fired Aluminium oxide grain with electrostatic coating, the sianet uses it's full surface for dust extraction, optimising extraction for a dust free surface and environment, with excellent stock removal & a perfect finish

Applications: For use on Primer, Wood, MDF, Plaster, Solid Surface, Acrylic Lacquer

Advantages: Very high stock removal, High tear resistance, Highly flexible, Optimum dust extraction

Grits Available:

80
180
240
400

Clearcoat: Mipa CC9 Clear 5 Litre Kit

£150.00 £110.00 (excl. VAT) Save £40.00

Choose a Colour

Product description

The Mipa 2K HS Klarlack CC9 Clear Coat Kit with HS25 Hardener (7.5L) is a high-solid acrylic clearcoat for cars/commercial vehicles, offering VOC compliance, excellent gloss, and flow over water or solvent basecoats, curing well at room temp or oven, featuring a 2:1 mixing ratio (clear:hardener) and a long pot life for consistent application. The kit typically contains 5L of CC9 Clearcoat and 2.5L of HS25 Standard Hardener, ideal for complete paint jobs, providing durability and a premium finish.

Key Features

Type: High-Solid (HS) Acrylic 2K Clearcoat.
Application: Full & partial resprays on cars & commercial vehicles.
Basecoats: Works perfectly over both water-borne and solvent-borne basecoats.
Finish: Brilliant gloss and optimal flow.
Curing: Fast surface drying, full hardness by oven or air drying (room temp).
VOC Compliant: Meets environmental regulations.

Kit Contents (7.5L)

Mipa CC9 Clearcoat: 5 Litres.
Mipa HS25 Hardener: 2.5 Litres (Standard Speed).

Mixing & Application

Mixing Ratio: 2 parts Clearcoat to 1 part Hardener (by volume).
Pot Life: Long (around 1 hour with HS25), allowing for consistent spray viscosity.
Drying Times (with HS25 Hardener):

At 20°C (Room Temp): ~6 hours.
At 60°C (Oven): 40-50 minutes.

Benefits

Superior Flow: Its slow viscosity build-up ensures a defect-free flow.
Durability: Provides a long-lasting, professional finish, enhancing vehicle appearance and protection

Primer: Mipa F37 primer

£50.00 £44.16 (excl. VAT) Save £5.84

Choose a Colour

MIPA HS F37

2K WET ON WET FILLER PRIMER 3L

Light Grey

Mipa 2K-HS-NiN-Füller F 37 is a high-quality wet-on-wet filler that offers excellent features for efficient coatings.

Intact, sound e-coatings can be overcoated with F 37 without any pre-sanding.

Its fast re-coatability and universal adhesion, even on plastic, are further advantages of the new wet-on-wet filler.

excellent spray mist absorption
re-coatable after 15 min
no sagging

Mixing ratio: 5:1 Hardener: H10, MS 10

Hardener included

Abrasive: Mirka Abralon 150mm Grip

£33.00 £29.00 (excl. VAT) Save £4.00

Choose a Colour

Mirka Abralon is a unique, multifunctional sanding material developed for tackling both smooth and profiled surfaces. Its patented, flexible construction allows it to create a smooth sanding pattern on angled surfaces and edges while minimising the risk of pressure marks. The flexible weave also allows water and air to pass freely, making it suitable for both dry and wet sanding, by machine or by hand. Pads can be used by hand or machine.

FEATURES:

Flexible Foam can be used for both smooth and contoured profile surfaces and edges.
Anti-clogging features reduce the temperature of the work surface to grant a longer life and enhanced finish quality.
Specifically designed for automotive paint applications, but also proven effective on nonferrous metals, steel, fiberglass, solid surface, plastic and hardwoods.
Can be used wet or dry.

SPECIFICATION:

Pack Count: 20 Discs
Grit: 3000
Diameter: 6" - 150mm
Backing: Hook & Loop
Made by: Mirka

SALE is for a Pack of 20 Discs