Kustom H2O Colours & Effects

Description:

Our Sparkle Pearls are the very best on the planet. Sparkle Pearls exhibit the brightest and most vivid colours due to their large size and give a sparkle effect in bright light/sun light. Sparkle Pearls are like no other pearls on the market as each colour gives off colours within the colour pearl. Apply Sparkle Pearls over any Basecoat colour to produce a real custom effect.

Mixing Ratio:

• Paints = Ready To Use (This is a waterbased product)
  

Sparkle Pearl Colours:

• Blue Sparkle Pearl
• Copper Sparkle Pearl
• Fire Gold Pearl
• Gold Sparkle Pearl
• Green Sparkle Pearl
• Purple Sparkle Pearl
• Rainbow Sparkle Pearl
• Red Sparkle Pearl
• Silver Sparkle Pearl
• Super Copper Pearl
• Turquoise Sparkle Pearl
  

Sparkle Pearl Application:

Sparkle Pearl coatings are easy to apply and can even be applied with an airbrush. For best results, use a Black Base coat, but using different colours will give you a real custom effect. 

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2–3 coats of Base coat, leaving 10–15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding to your gun to ensure product is mixed thoroughly.
  
• Apply 2–4 coats of Sparkle Pearl, depending on the effect you desire. Leave 10–15 minutes between coats. 
• Apply 2–3 coats of 2K Show Clear for a Real Deep Gloss finish.

Description:

Spectrum FX are based on a unique pigment that sparkle and shimmer through the light spectrum when viewed from different angles. Rounded, curved surfaces and sharp angles will highlight the magical appearance of Spectrum FX.

Mixing Ratio:

• Paints = Ready To Use (This is a waterbased product)
  

Application:

Spectrum FX is easy to apply and can even be applied with an airbrush. For best results use a Black, Silver or Gold Basecoat, but using different colours will give you a real custom effect

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2–3 coats of Base coat, leaving 10–15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding to your gun to ensure product is mixed thoroughly.
  
• Apply 1–4 coats of Spectrum FX, depending on the effect you desire. Leave 10–15 minutes between coats. 
• Apply 2–3 coats of 2K Show Clear for a Real Deep Gloss finish.

Description:

Inspire H20 Airbrush High Performance Reducer is intended for use with all Inspire H20 colours. Inspire H20 Airbrush High Performance Reducer greatly improves flow and improves drying times.

Description:

Inspire H20 Airbrush Transparent Base is a colourless binder base and can be used as a protective inter-coat or mix with colours that are over-reduced to thicken colour mix without losing transparency. Inspire H20 Transparent Base may be added in any amount to Inspire H20 colours and does not affect the shelf-life after mixing.

Description:

Crystal brings you a free flowing colour change (Flip Paint) unlike any other coating seen before. For the most dramatic effect apply Crystal over a dark coloured Basecoat but it can be applied over a light coloured Basecoat for a softer iridescent look, yet still intense colour change. The colour possibility is endless and brings a new dimension to your product.

Mixing Ratio:

• Paints = Ready To Use (This is a waterbased product)
  

Crystal Colours:

• Crystal Blue
• Crystal Gold
• Crystal Green
  

Crystal Application:

Crystal Flip Paints are easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat but using different colours will give you a real custom effect.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2–3 coats of Base coat, leaving 10–15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding to your gun to ensure product is mixed thoroughly.
  
• Apply 2–5 coats of Crystal, depending on the effect you desire. Leave 10–15 minutes between coats. 
• Apply 2–3 coats of 2K Show Clear for a Real Deep Gloss finish.

Description:

Passion brings you a smooth, free flowing colour change (Flip Paint) unlike any other coating seen before. For the most dramatic effect, Passion is applied over a Black Basecoat but can be applied over a lighter Basecoat for a softer, iridescent look yet still intense colour change. The colour possibility is endless and brings a new dimension to your product.

Mixing Ratio:

• Paints = Ready To Use (This is a waterbased product)
  

Passion Colours:

• Blue Passion - Shifts from Turquoise to Blue to Purple
• Desert Passion - Shifts from Pinky Red to Gold to Green
• Green Passion - Shifts from Green Turquoise to Bright Silver to Red to Gold
  
• Kiwi Passion - Shifts from Green to Silver to Red to Orange
• Purple Passion - Shifts from Strong Purple to Silver to Green to Blue
• Tropical Passion - Shifts from Gold to Silvery Green to Deep Blue
  

Passion Application:

Passion is easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat but using different colours will give you a real custom effect. 

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2–3 coats of Base coat, leaving 10–15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding to your gun to ensure product is mixed thoroughly.
  
• Apply 2–4 coats of Passion, depending on the effect you desire. Leave 10–15 minutes between coats. 
• Apply 2–3 coats of 2K Show Clear for a Real Deep Gloss finish.

Description:

Our Pearls are the very best on the planet. Our Pearls exhibit the brightest and most vivid colours. Apply our Pearls over any Base colour to produce a real custom effect.

Mixing Ratio:

• Paints = Ready To Use (This is a waterbased product)
  

Pearl Colours:

• Blue Pearl
• Gold Pearl
• Green Pearl
• Indigo Pearl
• Orange Pearl
• Magenta Pearl
• Purple Pearl
• Red Pearl
• Silver Pearl
• Solid Copper Pearl
• Solid Rich Gold Pearl
• Turquoise Pearl
  

Pearl Application:

Pearl coatings are easy to apply and can even be applied with an airbrush. For best results, use a Black Base coat, but using different colours will give you a real custom effect. 

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2–3 coats of Base coat, leaving 10–15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding to your gun to ensure product is mixed thoroughly.
  
• Apply 2–4 coats of Pearl, depending on the effect you desire. Leave 10–15 minutes between coats. 
• Apply 2–3 coats of 2K Show Clear for a Real Deep Gloss finish.