1.1LTR UPOL SMC BLACK CARBON FIBRE REINFORCED FILLER

High adhesion bonding paste and filling compound

Key Features

• High adhesion bonding paste and filling compound
• Designed to repair cracks, holes and scratches in SMC, fiberglass, composite and other rigid materials
• Reinforced with carbon fibre for structural strength
• Easy to sand to a fine finish

Description:

• 150mm, 7/0 holes, 50/100 discs per box,
• Latex paper backing,
• Aluminium oxide abrasive,
• High stock removal rate thanks to special aluminium oxide grain,
• Reduced clogging due to wide open coat,
• Long service life thanks to efficient non-stick system

Available in different grits:

• P40
• P60
• P80
• P120
• P180
• P240
• P320
• P400
• P500
• P600
• P800
• P1500
• P2000
• P2500
• P3000

Description:

Description:

Fine nitro-based 1K finishing putty.

Ideal for filling minor scratches, stone chips, pinholes and dents.

Can be applied after priming upon discovery of minor imperfections.

Good adhesion on steel and old coatings.

Abrasive Pads

Custom Paints offers Grey and Red Abrasive pads. 

Flexible, conformable Scotch-Brite Web produces a consistent, repeatable finish without altering the geometry of the workpiece. Save time and money by reducing rework and improving process time. Applications: Use when scuffing paint, deburring, defuzzing, cleaning, blending, finishing and polishing.

• Superior alternative to steel wool, wire brushes, sandpaper, and other non-woven products for cleaning or finishing tasks
• Pad resists tearing, splintering, shredding, loading and will never rust, providing a long, useful life
• Can be folded, stacked, or rolled for effective cleaning or conditioning on flat, irregular, or contoured surfaces

Blue Powder-Free Nitrile Disposable Gloves 

These Disposable Nitrile Gloves are powder-free and naturally anti-static. 

• Offer resistance to a range of chemicals
• Powder-free
• Ambidextrous
• Latex free

Description:

A good quality compounding foam primarily designed for use with compound pastes. The multi-layer foam provides increased cutting action & greater durability.
A backing plate is built in so there is no requirement for a backing pad & it is recessed to safeguard against accidental surface contact.
• Diameter: 6" / 150mm

Also available as a waffle

Black and white compound head for polishing.

Orange head for polishing. 

Waffle head hook and loop

Customising Tape

Perfect for flexible pinstriping. Create multi lined designs quickly and simply the multi cut tape consists of 8 x 1.5mm lines of tape.

JTAPE Customising Tape uses a thermally stablised PVC backing with a rubber based pressure sensitive adhesive. The Customising Tape has 8 lengths of pre-cut fine line masking tape – allowing a multitude of curved patterns to be created when customising vehicles. It is highly flexible, easy to curve and will hold and cleanly remove from surfaces in temperatures up to 132°C/270°F for at least 30 minutes. After demasking, it will leave no residue and a sharp, clean separation line.

Application

1. Apply fine line masking tape to set a guideline for application.
2. Follow the guideline with the product and apply pressure to ensure firm positioning.
3. Remove diecut strips where necessary.
4. Mask off remaining area in preparation for painting.
5. Paint over the unmasked area.
6. Remove masking materials to complete process.

Description:

Dust mask filter respirator with valve protect against moderate levels of fine dusts and mists.

The valve make breathing easier and helps avoid fogging up of goggles and glasses.

Box of 10

Description:

Polyester, fiberglass body filler with unique filling properties, which allows it to be applied in thick layers for repairs of deep dents and even rust through spots. Leaves smoother surface due to its short fibres.

Description:

• Excellent value for money
• Excellent quality to ensure a long life

G Mop Standard Compounding Head is a general purpose foam applicator pad with a high cut.

Primarily designed for use with compound pastes, a 6″ backing plate is built in so there is no requirement for separate back plate.

Description:

• True Colour Finish – G10 Finishing Compound acts as a gentle abrasive to bring colour back to discoloured paint surfaces
• Versatile Application – Can be used by hand or machine
• Dry Use – No water is required, reducing splatter and clean up time
• Superior Fine Cut – Ideal for removing light scratches or swirl marks, especially on darker colours
• `Perfect Finish – Quickly provides a high gloss finish and ultimate finish, saving time and money

G10 Finishing Compound is ideal for removing light scratches or swirl marks, especially on darker colours.

It will also restore older paint work and bring the true colour back.

Description:

 G6 Rapid Grade Paste Compound

• Permanent Finish Removes P1500 abrasive marks quickly and easily with no fillers
• Silicone Free Can be used in body shops and applied nearby to where paints are used
• High Gloss System Can be used with G10 Finishing Compound for an enhanced gloss finish 

G6 Rapid Grade Paste Compound is for use on OEM, Refinish Medium Solids and Air Dried 2k paint systems (well cured).

G6 Rapid Advanced Dry Use Liquid Compound

• Removes scratches permanently - has no fillers - no comeback from customers.
• The fastest system to achieve a high gloss - increased throughput.
• Dry use compound - no need to use water, therefore less mess and easier clean up.
• Can be used on all modern paint systems - one product for all, therefore will save money.
• Silicone free.
• Removes up to P1500 scratch marks.

• Permanent - contains no fillers, giving permanent scratch removal with no comebacks 
• Fast finish - a rapid system which achieves a high gloss finish and increases throughput
• Dry use - no need to use water, creating less mess and making the process more environmentally friendly
• Versatile - can be used on all modern paint systems
• Silicone free - can be used in bodyshops

The Farecla G6 Rapid System has been specifically developed to be used on all modern paintwork. It will reach the level of gloss required in the shortest time. For dry use only.

Description:

Description:

• For use with polyester body fillers, easy sand, fibreglass repair filler and resins.

Size:

• 40g
• 100g

Description

Green Fine Line Masking Tape

One of the Best Fine line tapes on the Market for Curved lines.

Green Fine Line Masking Tape Orange Fine Line Masking Tape uses a thermally stabilised PVC backing with a rubber based pressure sensitive adhesive. It is highly flexible, easy to curve and will hold and cleanly remove from surfaces in temperatures up to 132°C/270°F for at least 30 minutes. After demasking, it will leave no residue and a sharp, clean separation line.

Orange Fine Line Masking Tape

Masking tape for multi-colour and design paint jobs. Designed for long straight lines whilst remaining flexible.

Orange Fine Line Masking Tape uses a thermally stabilised PVC backing with a rubber based pressure sensitive adhesive. It is designed for straight lines whilst remaining flexible and will hold and cleanly remove from surfaces in temperatures up to 150°C/302°F for at least 30 minutes. After demasking, it will leave no residue and a sharp, clean separation line.

Description:

Flat foam masking tape in dispenser box

Adhesive foam masking tape for professional sealing gaps between doors, trunk and hood. This masking adhesive strip and spun tape is to prevent dust and spray mist in rebates and the emergence of sharp edges.

In addition, our masking adhesive strip is also suitable for masking body folds to create a nice transition from the paintwork!

Some characteristics of the masking adhesive strip:

• Self-adhesive foam strip for masking body openings such as door surrounds, hood cracks and engine cover gaps.
• Due to the special shape of the strip a very low lacquer edge is formed after spraying.
• Moreover masking adhesive strip keeps dust and dirt
• Fast and efficient system
• Low lacquer edge; no rework
• Time saving
• Simple and universal applications
• Adhesive-free
• Silicone free
• Round foam profile on reels and along 1 side with a heat-resistant adhesive

Size:

• 13mm x 50m in dispenser box

Description:

Green masking tape is water-resistant and can sit in an 80°C oven for up to one hour.  It has excellent adhesion with easy application to curved profiles and irregular surfaces. It’s easy to remove, leaving no residue. The adhesion is made up of natural rubber and hydrocarbon resins and the backing saturated water-resistant crepe paper.

• Premium water resist paper

• Excellent adhesion to most surfaces

• Easy application on curved profiles and irregular surfaces

• Easy removal

Sizes:

• 24mm
• 38mm
• 48mm

Box:

• 24mm x 45m - 36 rolls
• 38mm x 45m - 24 rolls
• 48mm x 45m - 20 rolls

Description:

PROXL DRY GUIDE COAT WITH APPLICATOR 150G GENERATION20

The ProXL Generation20 Dry Guide Coat is the quickest and most cost effective product for highlighting imperfections such as pinholes and scratches in filler and primer. It ensures bodywork is flat and body styling contours are true prior to final coat application. Supplied in a 150g tub with an easy-to-use applicator integrated into the lid.

Description

Gun Wash is a solvent based cleaning product designed specifically for the purpose of cleaning paint spray guns, spray equipment, brushes, containers etc. It is formulated as a budget cost solvent mix and is recommended for use in paint equipment cleaning applications only

For safety do not overnight soak spray guns.

Size: 

1 Litre

5 Litres

Description

Lime Precision Masking Tape is a high tack masking tape for interior and exterior applications. Lime Precision Masking Tape is a translucent rice paper masking tape, with an acrylic adhesive for highly protective bonds on sensitive surfaces.

Ideal for both solvent-based and water-based paint systems 120°C Lime Precision Masking Tape can be used for masking on painted surfaces, glass, plastics, trims, rubbers & wheels.

Size:

6mm

18mm

24mm

36mm

48mm

Description:

Masking paper in the roll. Ideal for masking up trim before painting or decorating, particularly where you are spraying using Airless or HVLP equipment.

Suitable for both water-borne and solvent-borne paints.

Sizes:

18" Masking paper

36" Masking paper

48" Masking paper

Description:

This masking tape is available in four different sizes and the superior adhesion masking tape can sit in an 80°C oven for one hour. It has excellent adhesion with easy application to curved profiles and irregular surfaces. It’s easy to remove, leaving no residue. The adhesion is made up of natural rubber and hydrocarbon resins and the backing is saturated crepe paper.

 Ideal For A Variety Of Masking Uses

Ideal for a wide variety of industrial applications including paint masking, bundling, attaching, labelling or decorating.

• Excellent solvent and water resistance.
• Good adhesion to many surfaces
• Removes cleanly after use
• Tears easily from roll
• Easy, clean and removal, mostly used for drafting out areas for crafts, automotive work and home interiors
• Easy application on curved profiles and irregular surfaces

Sizes:

• 24mm
• 38mm
• 48mm
• 75mm

Box:

• 24mm x 45m - 36 rolls
• 38mm x 45m - 24 rolls
• 48mm x 45m - 20 rolls
• 75mm x 45m -12 rolls

Description:

• Non-absorbent sheets
• Easy, clean and convenient way to mix up body fillers and putties prior to application

Translucent Orange Masking Tape

This translucent Orange Masking tape is a must when laying down patterns, The tape’s translucent nature means that it can be used for cutting out when painting custom designs and artwork.

Translucent Orange Masking Tape is a medium tack masking tape for exterior applications. The product consists of an orange rice paper masking tape with a custom formulated water based acrylic adhesive. The products is ideal for masking plastics, trims, rubbers & wheels.

2-in-1 fine line and masking tape. Lays down flat, Flexible, waterproof acrylic adhesive that prevents paint bleeding. Masks plastics, trims, rubber etc. Ideal for masking wheels.

6mm and 12mm are fantastic for masking small items especially rubbers around helmets visors and neck lines.

Disposable Overall for single use

Provides optimum protection against non-hazardous chemicals, like waterbased paints or harmless cleaning detergents. Protects the paint job against fibers, dust and lint. The overall is white to prevent distortion of colour vision. Seals tightly due to the elastic in the hood, ankles and cuffs. Zipper fastening at the front. 

Benefits of Disposable Overall

• Water and dust resistant 
• Seals tightly due to the elastic at the ankles and cuffs 
• Zipper fastening at the front 
• Tight closing hood (elastic)

Available in three sizes Large, Extra Large and Extra Extra Large

Paint Strainers

Paper paint strainer with nylon mesh, suitable for solvent based paints.

Use paint strainers to filter your paint before putting the paint into the spray gun and applying, this will prevent foreign particles entering the spray gun.

3 different sizes of paint strainers available.

• 125mic - is an ultra fine graded strainer suitable for water based paints.
• 190mic - is a fine graded strainer suitable for solvent based paints.

Premium Masking Tape:   

Premium every day masking tape by J-Tape. 

Premium 80ºC Crepe Masking Tape. Strong adhesion. Clean removal, no residue.

Benefits:

• Premium Crepe Masking Tape
• Strong adhesion
• Clean removal
• Leaves no residue
• 24mm, 36mm & 48mm rolls available

Box Quantities:

24mm x 50m: 36 rolls 

36mm x 50m: 24 rolls

48mm x 50m: 20 rolls

Description

ProCut Cutting Compound

A high-performance, single-stage extreme cutting compound that provides both excellent polishing results and ease of surface scratch removal from P1200 upwards. Specially developed with zero VOC content, offering safe usage and no odour, this cutting compound provides a long working time, allowing you to go from deep cutting through to polish cut using the same compound. Start with a hard cutting compound pad for weathered paintwork or paint defects, then change to the medium polish pad to finish.

ProCut Extreme cutting compound is able to polish from P1200 grit right to a high gloss finish in one stage, and doesn’t dry out, saving you time and money. Developed with a very low dust formula, and contains zero fillers, meaning there’s no drop in shine after use.

ProFinish Fine Finish Polish

A high-quality finishing polish based on microfine high purity aluminium oxide powder. Developed to be used after the ProCut cutting compound to leave an extremely high gloss shine. The polish effectively removes holograms and swirls, and is perfect for use on dark coloured paint.

Description:

Single Edge Blade Holder

Heavy duty professional scraper for removal of paint, glue and debris. Brass push button with a retractable blade for safety in between periods of use. 

Description:

3M™ Maintenance-Free Reusable Half Mask.

These FFA2P3 masks are ready-to-use, maintenance-free half face masks, designed for effective and comfortable protection against many gases, vapours and combination particulate hazards.

Key features:

• Disposable, maintenance-free half mask
• Twin inhalation valves and large, bonded carbon filters with permanently attached particulate filters
• Easy to use as no need for assembly, maintenance or record keeping
• Lightweight
• One size fits all
• Packaged in a resealable bag for hygienic storage.

Description:

10 x Filler spreader

Flexible and universal plastic filler spreaders. Ideal for use in automotive workshops.

Option:

Green

Jumbo black

TACK CLOTHS

Individually wrapped solvent tack cloths.

Features:

• Non-drying resin so they never dry out
• The edges are sealed to trap loose fibres
• Silicon free
• Size 45 x 19cm

Description:

An easy to use ultra smooth finishing filler for skimming and fine finishing in thin layers prior to the paint process.

Formerly Top Stop Gold

• High adhesion to multiple substrates
• Ease of application
• Easy to sand

Description:

The Big Smooth Easy One is an easy to use, smooth textured polyester filler for deep repairs.
The non-sag formula is ideal for use on vertical or horizontal repairs and its lightweight formula bonds to multiple substrates including galvanised steel, metal and GRP.
 

• Smooth textured, tack free finish
• Easy spreading and quick to shape
• Non-sagging when used on vertical surfaces
• Sandable after 20 minutes (at 20C)
• Size: 3L
• Hardener included

It has been specially formulated for the professional using the latest technology in lightweight body fillers and it combines excellent filling properties together with the easiest sanding of all the U-POL fillers. High adhesion to a wide range of substrates: steel, aluminium, GRP & wood. Sandable after 20 minutes at 20C, recommended that nothing coarser / lower than P80 is used. Can be over-painted with most paint systems including 2K

Description:

UPOL Extra Fine 750ml – Formerly TopStop

Extra Fine polyester filler is a two component multifunctional paste used for the filling of small holes and imperfections in most substrates prior to being over-painted.

Technical Data
100 parts by weight polyester filler,
2 parts by weight U-POL hardener for polyester filler.
The exact mixing ratio is not critical, although over or under activating may affect the cure time.
Do not greatly over activate the paste as this will not significantly speed up the cure time and could lead to bleed through and bleaching problems when over-painting later.
Staining may also occur where too little hardener is used.

Directions Of Use
Extra Fine polyester filler can be used on the following surfaces:-
– Bare metal e.g. Steel Aluminium and Zinc coated substrates, degrease and abrade with P80 paper.
– Original paint surfaces (with the exception of thermoplastic acrylics) degrease and abrade with P180 grit paper.
– GRP degrease and abrade with P80 grit paper.
Pot Life: Once mixed, 5 – 6 mins. at 20°c with 2% hardener.
Drying Time: Can be sanded after 20 mins. at 20°c. Extra Fine polyester filler can be over-painted with most paint systems including 2K.
Over Painting: Ideally a full system is recommended including primer.

Description:

Specially formulated for the professional using the latest technology in lightweight body fillers, it combines excellent filling properties together with the easiest sanding of all the U-POL fillers.

• Multifunction body filler that can be used for deep filling or finishing.
• Excellent spreadability and super easy sanding properties.
• Adheres directly to a variety of substrates including galvanised and some plastics.
• Uses the latest resin technology for a pinhole-free very easy sanding product even after 24 hours.

The two-component multifunctional paste is used for the filling of holes and imperfections in most substrates.

Description:

Upol P38 Easy Sand polyester filler 250ml is a two-component chemical paste used for the filling of holes and imperfections in surfaces such as steel and GRP.

It comes in a self-mixing cartridge with a nozzle that guarantees a correct mix with no mess. It’s simple to mix, dries quickly and sands smooth to prepare for primer.

It has been specially formulated for the professional user and combines good filling and smooth sanding properties together with ease of sanding. It can be used on the following surfaces; bare metal (degrease and abrade with P80 paper), original paint surfaces (with the exception of thermoplastic acrylics - degrease and abrade with P180 paper) and GRP (degrease and abrade with P80 paper).

Features & Benefits:

• Quick drying and sandable after 20 minutes (at 20C)
• Can be over-painted with most paint systems including 2K
• High adhesion

Wet and Dry Sandpaper

This wet and dry sandpaper is a high-quality waterproof abrasive with a lasting aggressive cut. It is non-absorbent, and the minimal suction to the surface gives a smooth sanding movement. 

Suited for manual wet sanding of paints, primers, lacquer, metal and composite materials.

2 different sizes and 7 different grit options available:

Size A4 230mm x 280mm:

•     80 grit
•   180 grit
•   240 grit
•   320 grit
•   400 grit
•   500 grit
•   600 grit
•   800 grit
• 1000 grit
• 1200 grit

Size A5 140mm x 230mm:

• 1500 grit
• 2000 grit
• 2500 grit
• 3000 grit

Description:

5 Inch Hand Sanding Block For Hook & Loop Sandpaper Hand Pad Polishing Pad

Size: 5 inch 125mm diameter, 45mm thickness