Aston Martin: DUSTY BLUE - Paint code 1293 (Special Colour)
All colours will come as "Standard" Shade unless stated. Other shades available on request.
All automotive colours are Mixed 1-1 with Thinner
This colour will dry to a flat finish and will require a 2K Clear coat.
1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.
Paint Application
Application for 2 Stage colours:
- Always check colour and spray test panels before spraying your product or project.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Mix base coat 1:1 with D-Thinner and stir well.
- Allow 1 hour (maximum 24 hours) before continuing to the next stage.
- Apply 2-3 coats of base coat leaving 10-15 minutes between coats.
- Allow 1 hour (maximum 24 hours) before continuing to the next stage.
- Apply our 2K Show Clear for a real deep gloss finish.
Application for 3 Stage colours:
- Always check colour and spray test panels before spraying your product or project.
- Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
- Mix base coat 1:1 with D-Thinner and stir well.
- Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
- Mix mid coat 1:1 with D-Thinner and stir well.
- Apply 2-3 coats of mid coat depending on the desire colour required. Leave 10-15 minutes between coats.
- Allow 1 hour (maximum 24 hours) before continuing to the next stage.
- Apply our 2K Show Clear for a real deep gloss finish.