2K CLEAR-COAT CANZ:

Specialist Paints brings you 2k Clear Coat in a aerosol can. The 2K aerosol is a brand new design unlike any other aerosol on the market, Its a better design then any other giving high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our 2K CLEAR CANZ can save on time & labour with no mixing or Spray gun cleaning. 2K CLEAR CANZ has good flow giving a great high gloss finish.

2K Clear-Coat CANZ is a great product for Vehicle spot repairs and small jobs that require High Gloss with strength and toughness of a Automotive lacquer.

PLEASE NOTE:  2K aerosols are single use only.  The contents must be used within 24 hours of the can being activated but for optimal finish we recommend application within 12 hours.

400ml 2K Clear-Coat CANZ Performance:

• 2-component technology (in-can activator system)
• High Gloss providing high scratch resistant
• Spray gun finish
• Quick Drying-time
• Excellent flow
• Easy polishing
• Up to 24hr pot life
• Particularly suitable for Vehicle Spot Repair

Candy CANZ:

Custom Paints award winning Candy is also available in aerosol cans. The Kustom canz range gives high output with excellent atomisation and high transfer efficiency with no pressure drop during application. Using our Kustom Canz range can save on time and labour without the requirement of expensive spraying equipment.

Candy Colours:

To get the best result from Kustom Canz Candy,  we recommend using our Base Metallic Silver Coarse as a ground coat and finishing with our market leading Custom Canz 2K Clearcoat.

There are 19 dramatic Candy Canz colours:

• Gold Candy
• Deep Red Candy
• Fools Gold Candy
• Orange Candy
• Cherry Candy
• Red Candy
• Ruby Red Candy
• Emerald Candy
• Blue Candy
• Brown Candy
• Black Candy
• Yellow Candy
• Deep Red Candy
• Green Candy
• Blueberry 
• Sugar Plum
• Teal Candy
• Ocean Candy
• Moss Green Candy

Application:

For best results use Base Metallic Silver Coarse but using different coloured basecoats will give you different effects. Candy Colours can also be used with our other products such as:  Shimmer, Pearl, Spectracoat, Sparkle Pearl, Flip Paint etc.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5 minutes.
• Apply 2-3 coats of base colour leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Candy effect colour.
• Apply 3-5 wet coats depending on the candy effect you desire. Leave 5-10 minutes between coats. (Always spray test panes before spraying you product or project)
• For best results we suggest to apply our 2K Clear-coat Aerosol CANZ

Description:

High Performance 1 component finishes. All colours are intermixable to create thousands of base colours.

Base Colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

For best performance use Custom Paints D-Thinner and Mix 2:1

Base Colours:

• Black Base 
• Blue Lagoon Base
• Blue Waves Base 
• Brown Base 
• Clearwater Base
• Cotton Candy Base
• Dark Blue Base 
• Dark Red Base
• Flesh Tone Base
• Fruit Punch Base
• Green Base  
• Lemon Base 
• Lemmon Drop Base
• Light Blue Base 
• Light Green Base 
• Light Grey Base 
• Light Purple Base 
• Lilac Base
• Mint Green Base 
• Mustard Base 
• Orange Base
• Peppermint Base 
• Pink Base 
• Red Base 
• Red Ochre Base
• Robin's Blue Base
• Sky Blue Base 
• Slime Green Base
• White Base 
• Yellow Ochre Base

Base CANZ:

Our Base Colours are now available in an aerosol can. CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Colours are easy to apply and can even be applied with an airbrush.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix Basecoat 2-1 with D-Thinner and stir well.
• Apply 2-3 coats, leave 10-15 minutes between coats. 
• Apply effect colour or 2K Show Clear for a Real Deep Gloss finish.

Metal Flake

Specialist Paints Metal Flakes are the HIGHEST grade you can buy, there are ultra thin, easy to smooth out and have outstanding sparkle. Our Metal Flakes are solvent proof and wont fade in sunlight as they have a high UV coating on them. we have had 100s of customers use our flakes and continue using us all the time. Apply our Metal Flakes over any base colour to produce a real custom effect. The Metal Flake can be added to solvent or water based Lacquers, Clear base coats, Varnish and can also be used for Arts n Crafts.

Metal Flake is available in Small (004 Hex), Medium (008 Hex) and Large (015 Hex).

The unique Metal Flake colour range:

• BLACK METAL FLAKE
• SILVER METAL FLAKE
• GUNMETAL METAL FLAKE
• GOLD METAL FLAKE
• DARK GOLD METAL FLAKE
• BRONZE METAL FLAKE
• COPPER METAL FLAKE
• ORANGE METAL FLAKE
• WINE RED METAL FLAKE
• FLAME RED METAL FLAKE
• PINK METAL FLAKE
• FUCHSIA METAL FLAKE
• PURPLE METAL FLAKE
• CLEAR METAL FLAKE
• SKY BLUE METAL FLAKE
• BLUE METAL FLAKE
• DEEP BLUE METAL FLAKE
• GREEN METAL FLAKE
• EMERALD METAL FLAKE
• BLURPLE METAL FLAKE

Metal Flake Application:

Apply our Metal Flakes over any base colour to produce a real custom effect. We recommend adding the Metal Flake to our Intercoat Clear base coat but you can add them to a Automotive solvent or water based Lacquer, Clear base coats and Varnish. Depending on how heavy you want the flake effect, will depend on how much you will need.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Add the Metal Flake to a Clear base coat or lacquer and stir well.
• Apply the Metal Flake until you get the effect you desire. Always spray test panels before spraying your product or project to see the effect you desire.
• Apply our 2k Show Clear until the Metal Flake is fully covered and you have full Gloss.

Spray Gun Size for Metal Flake:

(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.5 nozzle set-up or larger.

(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.8 nozzle set-up or larger.

(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.

Description:

Candy brings you the ultimate custom effect. For best results we recommend using our Base Metallic Silver Coarse but as Candy colours are completely transparent, they can be applied over any base colour/effect to create your own unique finish.

Candy colours can be faded into each other and also intermixed to create your very own custom colour.

All colours come ready to use.

Inspire Airbrush Candy Colours:

• Black Candy
• Blue Candy
• Blueberry Candy
• Brown Candy
• Cherry Red Candy
• Deep Red Candy
• Emerald Candy
• Fools Gold Candy
• Gold Candy
• Green Candy
• Moss Green Candy
• Ocean Candy
• Orange Candy
• Red Candy
  
• Ruby Red Candy
• Sugar Plum Candy
• Teal Candy
• Yellow Candy

Application:

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of base coat leaving 10-15 minutes between coats. 
• Allow 1 hour (maximum 24 hours)  before continuing to the next stage.
• Apply 3-5 coats of Candy depending on the effect you desire, leaving 15 minutes between coats. The more coats you apply, the more deeper and richer the colour will become.  
• Allow 1 hour (maximum 24 hours)  before continuing to the next stage.
• Apply 2K Show Clear for a real deep gloss finish.

Description:

Base Metallics have exceptionally high coverage, are easy to spray and possess high vertical stability with good flow characteristics. They can be simply top coated or used as a Basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1 

Base Metallic Colours:

• Base Metallic Ash Black
• Base Metallic Black
• Base Metallic Blue
• Base Metallic Coral Red
• Base Metallic Dark Gold (Coarse)
• Base Metallic Day Dreamer Blue
• Base Metallic Dipsy Blue
• Base Metallic Evergreen
• Base Metallic Gold
• Base Metallic Green
• Base Metallic Grey
• Base Metallic Ice Blue
  
• Base Metallic Kiwi Lightning
• Base Metallic Limoncello
• Base Metallic Mandarin
• Base Metallic Mocha
• Base Metallic Mystic Purple
• Base Metallic Pink
• Base Metallic Purple
• Base Metallic Red
  
• Base Metallic Rose Gold
• Base Metallic Sahara Sand
  
• Base Metallic Silver (Fine)
• Base Metallic Silver (Medium)
• Base Metallic Silver (Coarse)
• Base Metallic Sweet Pea
• Base Metallic Turquoise
• Base Metallic Venetian Red
• Base Metallic Wishful Pinkin'

Base Metallic CANZ:

Base Metallic CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base Metallics we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Metallics are easy to apply and can even be applied with an airbrush. Base Metallic colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.) We suggest a Light Grey or White Primer.
• Mix Base Metallic 2-1 with D-Thinner and stir well.
• Apply 2-3 coats, leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Inspire Airbrush Base Colours exhibit bright and vivid colours. All colours come ready to use.

All colours are intermixable to create thousands of colours. Base Colours can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paints, etc.

Inspire Airbrush Base Colours:

• Black Base
• Blue Lagoon Base
• Blue Waves Base
• Brown Base
• Clear Water Base
• Cotton Candy Base
• Dark Blue Base
• Dark Red Base 
• Flesh Tone Base
• Fruit Punch Base
• Green Base
• Lemon Base
• Lemon Drop Base
• Light Blue Base
• Light Green Base
• Light Grey Base
• Light Purple Base
• Lilac Base
• Mint Green Base
• Mustard Base
• Orange Base
• Peppermint Base
• Pink Base
• Red Base
• Red Ochre Base
• Robin's Blue Base
• Sky Blue Base
• White Base
• Yellow Ochre Base

Description:

D-Thinner is a high quality Reducer for all our base colours and effects.

Storage:

Shelf life 12 months. Highly Flammable liquid, store and use in accordance with the flammable liquid regulations.

Description:

The Base Metallic Aerosol Cans have exceptionally high coverage, are easy to spray and possess high vertical stability with good flow characteristics. They can be simply top coated or used as a basecoat for our Candy's, Liquid, Passion or any of our other effect coatings.

Base Metallic colours:

• Base Metallic Ash Black
• Base Metallic Black
• Base Metallic Blue
• Base Metallic Coral Red
• Base Metallic Dark Gold (Coarse)
• Base Metallic Day Dreamer Blue
• Base Metallic Dipsy Blue
• Base Metallic Evergreen
• Base Metallic Gold
• Base Metallic Green
• Base Metallic Grey
• Base Metallic Ice Blue
  
• Base Metallic Kiwi Lightning
• Base Metallic Limoncello
• Base Metallic Mandarin
• Base Metallic Mocha
• Base Metallic Mystic Purple
• Base Metallic Pink
• Base Metallic Purple
• Base Metallic Red
  
• Base Metallic Rose Gold
• Base Metallic Sahara Sand
  
• Base Metallic Silver (Fine)
• Base Metallic Silver (Medium)
• Base Metallic Silver (Coarse)
• Base Metallic Sweet Pea
• Base Metallic Turquoise
• Base Metallic Venetian Red
• Base Metallic Wishful Pinkin'
  

Base Metallic CANZ:

Base Metallic CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time & labour with no paint mixing or Spray gun cleaning.

To get the best result from Base Metallic we recommend using our 2K CLEAR-COAT CANZ. 2K CLEAR-COAT CANZ is the best 2k aerosol on the market!!

Application:

Base Metallic's coatings are easy to apply. Can be used as a base for our custom range or just clear coated.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 3-5 minutes.
• Apply 2-3 coats of base Metallic colour leaving 5-10 minutes between coats. Leave for 60 minutes before applying the effect colour or Clear-coat.
• For best results we suggest to apply our 2K Clear-coat Aerosol CANZ

Kustom Canz 1K Primer:

Kustom Canz 1k Primer is a premium primer-surfacer for fast spot priming providing a smooth pin hole free surface that is easily sanded.  Can be used directly onto many difficult substrates including alloy, stainless steel, zintec and galvanized. 

Kustom Can 1K Primer is available in 3 colours: White, Grey and Black

400ml 1K Primer Performance:

• Excellent adhesion and anti-corrosive properties.
• Quick drying-times.
• Spray gun finish achievable.
• Excellent smooth surface finish.
• Particularly suitable for vehicle spot repair.
• Available in 3 colours: white, grey & black.

APPLICATION:

• Remove all rust from metal surfaces.
• Clean surface with a suitable degreaser then abrade.
• Areas to be sprayed must be dry, free of grease and dust.
• Shake the aerosol can for at least two minutes after the agitator ball is free
• Carry out a test spray before spraying your project.
  
• Apply 1-2 coats wet coats,
• leave 10-15 minutes between coats.  
• Drying time 30-60mins @ 20`C  or 3 minutes using infrared heat.
• After use, turn the aerosol can upside down and spray to clear the valve.

Kustom Canz 1K Plastic Primer

A low solid, fast drying, transparent ready for use primer designed to provide adhesion to a wide range of plastics. Specially designed for flexible plastic car parts manufactured from, polyolefin, polypropylene and ethylene propylene modified. A524 Primer should be used only on those plastic parts that have no existing primer or other coating applied.

Use of a 2 component undercoat prior to topcoat is not necessary unless higher build is required. The plastic

primer can be topcoated directly.

• Excellent adhesion.
• Quick drying-times.
• Ideal for transparent plastic.

APPLICATION:

• Clean surface with a suitable degreaser
• Areas to be sprayed must be dry, free of grease and dust.
• Shake the aerosol can for at least two minutes after the agitator ball is free.
• Carry out a test spray before spraying your project.
  
• Apply 2 coats coats.
• Leave 5 minutes between coats.  
• Wait 15 minutes before beginning paint process. 
• After use, turn the aerosol can upside down and spray to clear the valve.

Base Aerosol Can:

Specialist Paints award winning Coatings are now available in a Aerosol Can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time & labour with no paint mixing or Spray gun cleaning. The KUSTOM CANZ range comes in a 150ml & 400ml Aerosol can.

Base Colours:

• Black Base 
• Blue Lagoon Base
• Blue Waves Base
• Brown Base
• Clearwater Base
• Cotton Candy Base
• Dark Blue Base
• Dark Red Base
• Flesh Tone Base
• Fruit Punch Base
• Green Base
• Lemon Base
• Lemon Drop base
• Light Blue Base
• Light Green Base
• Light Grey Base
• Light Purple Base
• Lilac Base
• Mint Green Base
• Mustard Base
• Orange Base
• Peppermint Base
• Pink Base
• Red Base
• Red Ochre Base
• Robin's Blue Base
• Sky Blue Base
• Slime Green Base
• White Base
• Yellow Ochre Base

e

Application:

Base coatings are easy to apply and can be used as a base for our custom range or just as they are.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5-10 minutes.
• Apply 2-3 coats of base colour leaving 5-10 minutes between coats. Leave for 30 minutes before applying the effect colour or Clear-coat.
• For best results we suggest to apply our 2K Clear-coat Aerosol KUSTOM CANZ

Description:

2K Show Clear is a Premium High Solids Urethane Clear coat is a high solid clear coat formulated to provide easy application, easy polishing, and long pot life.

2K Show Clear offers an excellent high gloss finish, great flow and anti-sagging properties.

2K Show Clear is suitable for all top-quality overall, spot and panel finishes.

This clear coat resists shrinkage and die back, and retains its glossy appearance whether baked or air-dried. And with advanced UV filters and absorbers, your finishes keep their beauty longer.

• Premium 2K Urethane Clear
• Excellent Hardness; Chemical Resistance & Flexibility

The mixing ratio:

• 2 parts Clear-coat
• 1 part Activator

2K Show Clear Kits:

5 Litre 2K Show Clear Kit: Total Mix - 7.5 Litres of Clear-coat.

• 5 Litre Clear-coat.
• 2.5 Litres Activator

1 Litre 2K Show Clear Kit: Total mix - 1.5 Litres of Clear-coat.

• 1 Litre Clear-coat.
• 500ml Activator.

Application:

SURFACE PREPARATION:

EXISTING FINISH: Sand surface with P600-P800 wet or P500-P600 dry, and then clean with Cleaner/Degreaser. Mask object/area to eliminate unwanted overspray. Use a tack cloth to remove any surface contaminates that may have settled on the basecoat.

FLASH / DRYING TIMES:

Dry and cure times are dependent on air movement, temperature and film builds.

RECOATING:

2K Diamond Clear may be repaired and recoated after 12-24 hours at 70° F/21° C. 2K Diamond Clear may be repaired and recoated when force dried after 1 hour cool down.

EQUIPMENT CLEANING:

Clean equipment immediately after use according to local regulations.

POLISHING:

Air Dry:             After 24 hours

Force Dry:           1 hours after cool down.

Sanding:             Use 2000 grit wet or finer. Or use 2000 DA or finer.

Compounding:  Use finishing compound. Apply a thin ribbon of material to the area to be polished. Use a double-sided wool polishing pad or a foam pad. Maintain air polisher or variable speed buffer at 1800-3000 rpm. Remove excess finishing compound with a clean, soft cloth prior to applying finishing polish.

Holographic Metal Flake:

Holographic Metal Flakes are one of the finest flakes available. They shimmer through a rainbow of colours when viewed at different angles. Our Holographic Metal Flakes are solvent proof and wont fade in sunlight as they had a high UV coating on them. we have had 1000s of customers use our Holographic Metal Flakes and continue using us all the time. Apply our Holographic Metal Flakes over any base colour to produce a real custom effect. The Metal Flake can be added to solvent or water based Lacquers, Clear base coats, Varnish and can also be used for Arts n Crafts.

The Holographic Metal Flakes are available in Medium (008 Hex) and Large (015 Hex).

The Holographic Metal Flake Colour Range:

• SILVER HOLOGRAPHIC METAL FLAKE
• GOLD HOLOGRAPHIC METAL FLAKE
• BLUE HOLOGRAPHIC METAL FLAKE
• RED HOLOGRAPHIC METAL FLAKE
• ORANGE HOLOGRAPHIC METAL FLAKE
• PINK HOLOGRAPHIC METAL FLAKE
• GREEN HOLOGRAPHIC METAL FLAKE
• PURPLE HOLOGRAPHIC METAL FLAKE
• BLACK HOLOGRAPHIC METAL FLAKE
• SAPPHIRE HOLOGRAPHIC METAL FLAKE
• FUCHSIA HOLOGRAPHIC METAL FLAKE

Holographic Metal Flake Application:

Apply our Holographic Metal Flakes over any base colour to produce a real custom effect but most customers use a black basecoat. We recommend adding the Holographic Metal Flake to our Intercoat Clear base coat but you can add them to a Automotive solvent or water based Lacquer, Clear base coats and Varnish. Depending on how heavy you want the Holographic Metal Flake effect, will depend on how much you will need.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Add the Holographic Metal Flake to a Clear base coat or lacquer and stir well.
• Apply the Holographic Metal Flake until you get the effect you desire. Always spray test panels before spraying your product or project to see the effect you desire.
• Apply lacquer until the Holographic Metal Flake is fully covered and you have full Gloss.

Spray Gun Size for Metal Flake:

(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.5 nozzle set-up or larger.

(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.8 nozzle set-up or larger.

(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.

Flakes CANZ:

Specialist Paints award winning Coatings are now available in a Aerosol Can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time & labour with no paint mixing or Spray gun cleaning. The CANZ range comes in a 400ml Aerosol can.

CANZ Performance:

• High Performance 1 component Finishes
• Excellent Hardness; Chemical Resistance & Flexibility
• Suitable for use on a wide range of Plastics including HIPS; ABS; ABS/PC; PC; PVC, as well as suitable pre-treated metals
• Ideal as 1 Coat Finishes for a variety of end uses including Automotive; Electronics; Household Goods etc.
• Used as base coat under 1 & 2 component Lacquers including Ultra Violet Cured
• Suitable for use with Cubic Printing Process

Flakes Colours:

Flakes are the finest grade you can buy, there are ultra thin, easy to smooth out and have outstanding sparkle. Apply our Flakes over any base colour to produce a real custom effect.

There are 13 Custom Aerosol Can Flake colours and come in our small size Flake.

• Dark Gold Flake
• Flame Red Flake
• Bronze Flake
• Purple Flake
• Blue Flake
• Emerald Flake
• Silver Flake
• Deep Blue Flake
• Orange Flake
• Fuchsia Flake
• Clear Flake
• Pink Flake
• Gold Flake
• Gunmetal
• Please contact for more colours

Application:

Flakes Custom Aerosol CANZ are easy to apply and for best results use a Black base coat but using different colours will give you a real custom effect. Flakes Custom Aerosol CANZ colours can also be applied over our other Liquid, Spectracoat, Pearl, flip paint to get true custom effect.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5 minutes.
• Apply 2-3 coats of base colour leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Flakes effect.
• Apply 2-5 coats depending on the Flakes effect you desire. Leave 5-10 minutes between coats. (Always spray test panels before spraying you product or project)
• For best results we suggest to apply our 2K Clear-coat Aerosol CANZ

Chromacoat Shifting effect changes colour right before your eyes. Chromacoat finishes are based on the revolutionary ChromaFlair Colour shifting colorants. These are unique colorants that offers previously unattainable colour performance, they actually change colour depending on the angle from which they are viewed. More than just a subtle variation in shade, the colour undergoes an almost magical transformation in appearance. On rounded curved surfaces and sharp angles will highlight the magical appearance of Chromacoat.

The unique colour range:

• Chromacoat Silver - Shifts from Silver - Green - Purple
• Chromacoat Cyan - Shifts from Cyan - Purple - Gold
• Chromacoat Green - Shifts from Green - Blue - Purple - Gold
• Chromacoat Blue - Shifts from Blue - Red - Gold
• Chromacoat Gold - Shifts From Gold - Silver
• Chromacoat Red - Shifts From Red - Gold
• Chromacoat Voodoo - Shifts from Purple - Green
• Chromacoat Swift Green - Shifts from Green - Blue
• Chromacoat Peacock - Shifts from Green - Blue - Purple - Green
• Chromacoat Purple - Shifts from Purple - Green - Violet
• Chromacoat Golden Night - Shifts from Gold - Silver - Blue
• Chromacoat Flamingo - Shifts from Purple - Pink - Gold - Green
• Chromacoat Sunrise - Shifts from Gold - Silver - Purple
• Chromacoat Siren - Shifts from Silver - Green - Blue - Purple
• Chromacoat Heather - Shifts from Pinky Purple - Blue - Violet
• Chromacoat Copper - Shifts from Copper - Blue - Purple
• Chromacoat Autumn Spice - Shifts from Copper Orange - Gold - Green

Application:

Chromacoat coatings are easy to apply and for best results use a Black base coat but using different colours will give you a real custom effect. Chromacoat colours can also be applied over our other Candy, Sparkle, flip paint to get true custom effect.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 3-5 minutes.
• Apply 2-3 coats of base colour leaving 5-10 minutes between coats. Leave for 60 minutes before applying the Chromacoat effect colour.
• Apply Chromacoat 2-5 coats depending on the effect you desire. Leave 5-10 minutes between coats. (Always spray test panels before spraying you product or project)
• For best results we suggest to apply our 2K Clear-coat Aerosol CANZ

BASE PEARLZ CANZ:

Base Pearlz colours have a massive depth of colour and a shimmering iridescence that leaves other basecoats looking lifeless, dull and boring! Our base pearlz have an extreme amount of pearl Luster.

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a basecoat for our Candy's, Liquid, Passion or any of our other effect coatings.

Base Pearlz colours:

• Sugar Apple (Best used over White Base)
• Pineapple (Best used over White Base)
• Sunburst (Best used over White Base)
• Honey (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Snow White (Best used over White Base)
• Orange Fusion (Best used over White Base)
• Champagne Pink (Best used over White Base)
• Purple Lust (Best used over White Base)
• Blue Grape (Best used over White Base)
• Fizzy Pink (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Sky Black (Best used over Black Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Daytona Beaches (Best used over Mint Green Base)
• Keys West (Best used over a Blue Waves Base)
• Pink Miami (Best used over a Pink Base)
• Peachy King (Best used over White Base)
• Novak Purple  (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Coconut (Best used over Black Base)

Base Pearlz Application:

Base Pearlz coatings are easy to apply and for best results apply over a Light grey or White Primer. 

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 3-5 minutes.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying Base Pearlz colour.
• Apply 2-4 coats depending on the Base Pearlz effect you desire. Leave 5-10 minutes between coats. Leave 60 minutes before applying 2K Clearcoat.
• Apply our 2K Show Clear Aerosol Canz for a Real Deep Gloss finish.

Description:

Lumo brings you the brightest custom paint finish. Lumo paint is a high visibility fluorescent coating in daylight and artificial light. Please remember to pick your application of this product carefully, it has limited lightfastness. USE WITH DISCRETION.

For best performance use Custom Paints Reducer and Mix 2-1

Lumo Paint Kits:

Lumo Kits Will Include:

• Base White
• Lumo Colour
• D-Thinner
• 2K Clearcoat + Activator

Lumo Colours:

• Green Lumo
• Orange Lumo
• Pink Lumo
• Red Lumo
• Yellow Lumo

Lumo CANZ:

Our award winning Lumo is now available in an aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Lumo CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Lumo coatings are easy to apply and can even be applied with an airbrush. For best results use a White Basecoat. Please remember to pick your application of this product carefully, it has limited lightfastness. USE WITH DISCRETION.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Lumo 2-1 with Reducer and stir well.
• Apply 3-6 coats of Lumo depending on the effect you desire, leaving 15 minutes between coats. 
• Apply 2K Show Clear HI-UV Clearcoat for a Real Deep Gloss finish. IMPORTANT: Ensure Clearcoat is fully dry before removing from spray booth. This is to ensure daylight doesn't shine on paint work until fully dry giving full protection to the Lumo coating.

Description:

Base Pearlz colours have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl Luster.

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a Basecoat for our Candy, Liquid, Passion, etc. 

The Inspire Airbrush  colours come ready to use.

Inspire Airbrush Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over a Blue Waves Base)
• Miami Pink (Best used over a Pink Base)
• Monza Red (Best used over a Red Base)
• Novak Purple   (Best over White Base)
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best over White Base)
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Apply 2-5 coats of Base Pearlz depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

The Inspire Airbrush Base Metallic range now includes several new and exciting colours. Base Metallics have exceptionally high coverage, are easy to spray and possess high vertical stability with good flow characteristics.

 All colours come ready to use.

Inspire Airbrush Base Metallic Colours:

• Base Metallic Ash Black
• Base Metallic Black
• Base Metallic Blue
• Base Metallic Coral Red
• Base Metallic Dark Gold (Coarse)
• Base Metallic Day Dreamer Blue
• Base Metallic Dipsy Blue
• Base Metallic Evergreen
• Base Metallic Gold
• Base Metallic Green
• Base Metallic Grey
• Base Metallic Ice Blue
  
• Base Metallic Kiwi Lightning
• Base Metallic Limoncello
• Base Metallic Mandarin
• Base Metallic Mocha
• Base Metallic Mystic Purple
• Base Metallic Pink
• Base Metallic Purple
• Base Metallic Red
  
• Base Metallic Rose Gold
• Base Metallic Sahara Sand
  
• Base Metallic Silver (Fine)
• Base Metallic Silver (Medium)
• Base Metallic Silver (Coarse)
• Base Metallic Sweet Pea
• Base Metallic Turquoise
• Base Metallic Venetian Red
• Base Metallic Wishful Pinkin'

Application:

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
  
• Apply 2-5 coats of Base Metallic depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply 2K Show Clear for a Real Deep Gloss finish.

Description:

Candy Intensifier (concentrate) is used to strengthen any of our Candy range to produce a deeper and richer effect.

Adding Candy Intensifier to our range of Candy paints allows you to create deeper colours in fewer coats.

Candy Intensifier is an additive and not designed to be used as a coating on its own.

Candy Intensifier (Concentrate) Colours:

• Black Candy
• Blue Candy
• Blueberry Candy
• Brown Candy
• Cherry Red Candy
• Deep Red Candy
• Fools Gold Candy
• Gold Candy
• Green Candy
• Emerald Candy
• Moss Green Candy
• Ocean Candy
• Orange Candy
• Red Candy
• Ruby Red Candy
• Sugar Plum Candy
• Teal Candy
• Yellow Candy

MTVs PIMP MY RIDE UK:

Custom Paints has teamed up with MTV's PIMP MY RIDE UK for series 3. PIMP MY RIDE UK used our Candy Red on the Daimler XJ6. Our Silver and Black Base were used, fading Silver at the front to Black at the back. Candy Red was then applied over the top.

Description:

2K High Build Primers are a high quality two-component extra build / easy sand acrylic urethane primer with excellent build, colour holdout and durability. Available in 3 colours: grey, white and black which can be blended to make different shades of grey.

Substrates:

2K High Build Primers can be used on the following substrates:

• OEM primer
• GRP / fiberglass
• Epoxy primer surface
• Polyester putties
• Etch primer
• Existing finishes in good condition

Mixing:

The mixing ratio:

• 4 parts 2K High Build Primer
• 1 part Activator
• + 10% 2K Thinner (Optional)

Included in 2K Primer Kit:

2K High Build Primer 1 Litre Kit:

• 1 Litre High Build Primer (Colour of choice)
• 250ml Activator.

2K High Build Primer 4 Litre Kit:

• 4 Litres of High Build Primer (Colour of choice)
• 1 Litre of Activator.