2K Show Clear

2K Show Clear

Regular price £20.00 (excl. VAT) Save £-20.00
-1316 in stock

Description:

2K Show Clear is a Premium High Solids Urethane Clear coat is a high solid clear coat formulated to provide easy application, easy polishing, and long pot life.

2K Show Clear offers an excellent high gloss finish, great flow and anti-sagging properties.

2K Show Clear is suitable for all top-quality overall, spot and panel finishes.

This clear coat resists shrinkage and die back, and retains its glossy appearance whether baked or air-dried. And with advanced UV filters and absorbers, your finishes keep their beauty longer.

  • Premium 2K Urethane Clear
  • Excellent Hardness; Chemical Resistance & Flexibility

The mixing ratio:

  • 2 parts Clear-coat
  • 1 part Activator

2K Show Clear Kits:

5 Litre 2K Show Clear Kit: Total Mix - 7.5 Litres of Clear-coat.

  • 5 Litre Clear-coat.
  • 2.5 Litres Activator

1 Litre 2K Show Clear Kit: Total mix - 1.5 Litres of Clear-coat.

  • 1 Litre Clear-coat.
  • 500ml Activator.

Application:

SURFACE PREPARATION:

EXISTING FINISH: Sand surface with P600-P800 wet or P500-P600 dry, and then clean with Cleaner/Degreaser. Mask object/area to eliminate unwanted overspray. Use a tack cloth to remove any surface contaminates that may have settled on the basecoat.

FLASH / DRYING TIMES:

 

AIR DRY

FORCE DRY

INFRARED DRY

Flash between coats:

After First Coat = 10-15 minutes

After Second coat = 15-20 minutes

Out of Booth: 30—60 minutes

(depending on temperature)

 

Purge time: 15 minutes.

Cycle Time: 40 minutes @ 140ºF/60ºC metal temperature.

Dust Free: After full cool down.

Refer to the infrared manufacturer’s guide for setup recommendations.

 

Dry and cure times are dependent on air movement, temperature and film builds.

 

RECOATING:

2K Diamond Clear may be repaired and recoated after 12-24 hours at 70° F/21° C. 2K Diamond Clear may be repaired and recoated when force dried after 1 hour cool down.

EQUIPMENT CLEANING:

Clean equipment immediately after use according to local regulations.

 

POLISHING:

Air Dry:             After 24 hours

Force Dry:           1 hours after cool down.

Sanding:             Use 2000 grit wet or finer. Or use 2000 DA or finer.

Compounding:  Use finishing compound. Apply a thin ribbon of material to the area to be polished. Use a double-sided wool polishing pad or a foam pad. Maintain air polisher or variable speed buffer at 1800-3000 rpm. Remove excess finishing compound with a clean, soft cloth prior to applying finishing polish.