Fast mover Mini Air Regulator with Gauge

Professional Quality

Screw onto the bottom of your spray gun for precise air control. Compact dimensions means that it is unobtrusive during use.

Mini regulator with gauge that reads in PSI and BAR.

Product Code: FMTAR805

The FMT3040 Spray Gun Air Pressure Regulator is a small and lightweight option for an on-gun air pressure regulator.

• This unit is very small (just 32mm) and lightweight (just 100g) and features a glass lens which isn’t affected by the solvents.
• King Pressure Range: 7PSI(0.5BAR) – 114PSI(7.8BAR)
• Size: 32mm long

Description for 4+1 Primer

Mipa 4+1 Acrylfiller HS has very good filling properties and is very easy to sand. This filler can be used as compact as well as high-build filler.

The combination with Mipa 2K-Reaktivzusatz VR allows a very quick processing followed by heat-drying or drying at room temperature.

This offers saving potentials in terms of spray booth occupancy, stoving times as well as working time. It is also suitable to fill partial areas (Spot repair) without sinkage or visible marks in the outer rim.

Another application option when using Mipa 2K Reaktivzusatz VR is the wet-on-wet application, after which the surface can be overcoated after only a very short intermediate drying of only 10 minutes at room temperature.

Spreading rate: 5,0 - 6,0 m²/l (for 50 - 80 µm DFT)

Description for H5 Hardener

Mipa 2K H5 extra fast acrylic hardener, specially developed to be used in conjunction with Mipa 2K primers.

Mixing ratio 4:1 by volume

Description

This block is an original style rubber rubbing down block, for use with wet or dry sanding sheets available here.

- For use with wet & dry sheets
- Small block to enable easy sand ability
- Good quality

Description:

Candy brings you the ultimate custom effect. For best results we recommend using our Base Metallic Silver Coarse but as Candy colours are completely transparent, they  can be applied over any base colour/effect to create your own unique finish.

Candy colours can be faded into each other and also intermixed to create your very own custom colour.

For best performance use Custom Paints D-Thinner to mix 2:1

Candy Paint Kits:

Candy Kits Will Include:

• Base Metallic Silver (Coarse)
• Candy Colour
• D-Thinner
• 2K Show Clear & Activator

Candy Colours:

• Black Candy
• Blue Candy
• Blueberry Candy
• Brown Candy
• Cherry Red Candy
• Deep Red Candy
• Emerald Candy
• Fools Gold Candy
• Gold Candy
• Green Candy
• Moss Green Candy
• Ocean Candy
• Orange Candy
• Red Candy
• Ruby Red Candy
• Sugar Plum Candy
• Teal Candy
• Yellow Candy

MTVs PIMP MY RIDE UK:

Custom Paints has teamed up with MTVs PIMP MY RIDE UK for series 3. PIMP MY RIDE UK used our Candy Red on the Daimler XJ6. Our Silver and Black Base were used, fading Silver at the front to Black at the back. Candy Red was then applied over the top.

CANDY CANZ:

Custom Paints award winning Candy is also available in aerosol cans. The Kustom canz range gives high output with excellent atomisation and high transfer efficiency with no pressure drop during application. Using our Kustom Canz range can save on time and labour without the requirement of expensive spraying equipment.

To get the best result from Kustom Canz Candy,  we recommend using our Base Metallic Silver Coarse as a ground coat and finishing with our market leading Custom Canz 2K Clearcoat.

Application:

For best results use Base Metallic Silver Coarse but using different coloured basecoats will give you different effects. Candy Colours can also be used with our other products such as:  Shimmer, Pearl, Spectracoat, Sparkle Pearl, Flip Paint etc.

Always spray test panels before spraying your product or project.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of base coat leaving 10-15 minutes between coats. 
• Allow 1 hour (maximum 24 hours)  before continuing to the next stage.
• Mix Candy 2:1 with D-Thinner and stir well.
• Apply 3-5 coats of Candy depending on the effect you desire, leaving 15 minutes between coats. The more coats you apply, the more deeper and richer the colour will become.  
• Allow 1 hour (maximum 24 hours)  before continuing to the next stage.
• Apply 2K Show Clear for a real deep gloss finish.

Description:

Marble FX offers you an exciting paint finish. With Marble FX you can achieve many effects, including a deep marble or snake skin appearance with a changing colour effect. Marble FX is applied as a Mid coat that can simply be cleared over or try it with our Candy Paints. (Note: This is a Water Based Coating)

 All colours come ready to use.

Inspire Airbrush Marble FX Colours:

• Blue Marble FX
• Desert Marble FX
• Green Marble FX
• Kiwi Marble FX
• Purple Marble FX

Application:

Marble FX is easy to apply. For best results use a Black Basecoat, but using different colours will give you a real custom effect.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats. Wait 1 hour before applying the Marble FX to ensure Basecoat is fully dry.
• Stir Marble FX well. Marble FX is ready to use.
• Apply 1 WET coat. Immediately use cling wrap, plastic sheeting or your choice of texturing tool to produce the desired effect. Apply cling wrap to the entire part, rub the cling wrap down with your hand to insure contact with surface, then remove the cling wrap leaving you with a marble like finish.
• Allow 1-2 hours drying time before applying a Candy or a 2K Clearcoat.

Inspire Airbrush Fire Kit

Fire Kit includes 8 x 100ml Bottles:

• Blue Pearl 
• Gold Candy
• Lemon Base
• Orange Base
• Orange Candy
• Ruby Red Candy
• White Base
• Thinner
  

Inspire Airbrush Kits:

Inspire Airbrush Base Kit includes 10 Colours

BASE COLOURS: Black Base, Dark Blue Base, Dark Red Base, Flesh Tone Base, Green Base, Lemon Base, Mustard Base, Orange Base, Red Base, White Base

Inspire Airbrush Candy Kit includes 10 Colours

CANDY COLOURS: Black Candy, Blue Candy, Brown Candy, Cherry Red Candy, Emerald Candy, Fools Gold Candy, Gold Candy, Orange Candy, Red Candy, Ruby Red Candy

Inspire Airbrush Sparkle Pearl Kit includes 8 Colours

SPARKLE PEARL COLOURS: Blue Sparkle Pearl, Copper Sparkle Pearl, Gold Sparkle Pearl, Green Sparkle Pearl, Purple Sparkle Pearl, Red Sparkle Pearl, Silver Sparkle Pearl, Turquoise Sparkle Pearl 

For professional use only, this U-POL Maximum Hardener is intended to be used with U-POL's Maximum 2:1 HS Clear Coat, requiring a mix of two parts clear coat to one part hardener. This product contains isocyanates and comes in a 2.5-litre tin.

Features & Benefits

• Specifically formulated for use with U-POL's Maximum 2:1 HS Clear Coat
• Contains isocyanates for enhanced durability
• 2.5-litre tin
• For professional use

Description

Colourless transparent special adhesion promoter for use on plastic substrates.

This product can also be used on problematic substrates such as anodised aluminium or copper without sanding. No influence on the transparency of subsequent clearcoats.

Ready for use.

Perfect for final blending and ultra-fine surface preparation

Achieve flawless finishing results with Q1® Violet MICROFINE Double Sided Sanding Pads, designed for professionals who demand precision and consistency. Each box contains 50 high-performance sanding pads engineered with cutting-edge technology for superior results during manual sanding.

The violet-coloured pad features an ultra-fine grit range of 1000–1500, making it ideal for final blending, fading out, and fine surface preparation before painting or polishing.

Thanks to Q1®’s innovative double-sided coating system, these pads can be used wet or dry, extending their life and maintaining consistent performance. The 13mm foam layer ensures a comfortable grip and perfect adaptability to curved surfaces, edges, and hard-to-reach areas.

Grit: 1000–1500 (Microfine)

Pad Size: 98mm x 120mm x 13mm

Colour: Violet

Quantity: 50 pads per box

Usable on: Wet or Dry surfaces

Passion Aerosol Can Colours:

PASSION brings you a smooth free flowing colour change ( Flip paint ) unlike any other coating seen before. For the most dramatic effect Passion is applied over a black base coat but can be applied over a lighter base coat for a softer iridescent look yet still intense colour change. The colour possibility is endless and brings a new dimension to your product.

Passion Aerosol Kit:

• 1 x Base Black (Other colours available on request) 
• 1 x Passion Colour 
• 1 x 2K Clearcoat

There are 6 dramatic Passion colours:

• GREEN PASSION shifts from a Green Turquoise to a bright Silver to a Red and Gold.
• KIWI PASSION shifts from a Green to Silver to Red to Orange.
• TROPICAL PASSION shifts from a Gold to Silvery Green to Deep Blue.
• DESERT PASSION shifts from a Pinky Red to Gold to Green.
• PURPLE PASSION shifts from a strong Purple over Silver and Green to Blue.
• BLUE PASSION shifts from a Turquoise to Blue to Purple.

Application:

Passion coatings are easy to apply and for best results use a Black base coat but using different colours will give you a real custom effect. Passion CANZ colours can also be applied over our other Candy, Spectracoat, Sparkle, flip paint to get true custom effect.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5-10 minutes.
• Apply 2-3 coats of base colour leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Passion effect colour.
• Apply Passion 2-4 coats depending on the effect you desire. Leave 5-10 minutes between coats. (Always spray test panels before spraying your product or project). Leave for 60 minutes before applying the Clear coat.
• For best results we suggest to apply our 2K Clear-coat Aerosol CANZ

Inspire Airbrush Primary Kit:

Inspire Airbrush colours are ultra-high performance airbrush paints that use the very best exterior grade resins and pigments to give brilliance, clarity and depth to any airbrush project. Inspire Airbrush colours have exceptional flow and atomization right out of the bottle with most airbrush tip sizes. Inspire Airbrush colours may be reduced with Inspire Reducer for improved flow, atomization and customizing viscosity preferences.

Primary Kit includes 6 x 100ml Bottles:

• Black Base
• Dark Blue
• Green Base
• Lemon Base
• Red Base
• White Base

Inspire Airbrush Kits:

Inspire Airbrush Base Kit includes 10 Colours

BASE COLOURS: Black Base, Dark Blue Base, Dark Red Base, Flesh Tone Base, Green Base, Lemon Base, Mustard Base, Orange Base, Red Base, White Base

Inspire Airbrush Candy Kit includes 10 Colours

CANDY COLOURS: Black Candy, Blue Candy, Brown Candy, Cherry Red Candy, Emerald Candy, Fools Gold Candy, Gold Candy, Orange Candy, Red Candy, Ruby Red Candy

Inspire Airbrush Sparkle Pearl Kit includes 8 Colours

SPARKLE PEARL COLOURS: Blue Sparkle Pearl, Copper Sparkle Pearl, Gold Sparkle Pearl, Green Sparkle Pearl, Purple Sparkle Pearl, Red Sparkle Pearl, Silver Sparkle Pearl, Turquoise Sparkle Pearl 

Description

The multifunctional and classic Abranet is especially developed for sanding putty, primers, lacquers, composite materials and a wide range of other materials for industrial use.

Abranet combines high performance and a long lifespan, making it a cost-effective solution. 

Designed for dry sanding, by hand or with a machine, the true dust-free sanding characteristics result in a cleaner work environment, as well as a better surface finish.

Sizes:

• 70mm x 198mm
• 70mm x 420mm

Grit:

• P80
• P180
• P120
• P240
• P320
• P400
• P500
• P600

7122 A1p2 Half Mask

Extremely lightweight, the mask body is made from hypoallergenic material which is gentle on the skin.

The low profile design offers excellent field of vision.

Easy accessible components for cleaning and maintenance.

Use with Moldex EASYLOCK Filters system that requires no additional clips or holders.

Size Medium, complete with A2 P3 filters. A2 organic gas [Bp>65oC], 5000ppm.

P3 protection against harmful and carcinogenic dusts, fumes and water/oil based mists/aerosols 10 x WEL

• Measurement and mixing of paint and coatings, can be used in Solvent and Water Born Coatings, Resistant to solvents
  
• also has Centimetre ruler on both sides
• material: Aluminium
•  One stick has two ratios 1:1 and 2:1 , one side in silver colour, the other size in red colour

Description:

Chromacoat shifting effect changes colour right before your eyes. Chromacoat finishes are based on the revolutionary ChromaFlair Colour shifting colorants. These are unique colorants that offers previously unattainable colour performance, they actually change colour depending on the angle from which they are viewed. More than just a subtle variation in shade, the colour undergoes an almost magical transformation in appearance. On rounded curved surfaces and sharp angles will highlight the magical appearance of Chromacoat.

For best performance use Custom Paints Reducer and Mix 2-1

Chromacoat Paint Kits:

Chromacoat Kits Will Include:

• Base Black
• Chromacoat Colour
• D-Thinner
• 2K Show Clear & Activator
  

Chromacoat Colours:

• Chromacoat Autumn Spice - Shifts from Copper Orange - Gold - Green
• Chromacoat Blue - Shifts from Blue - Red - Gold
• Chromacoat Copper - Shifts from Copper - Blue - Purple
• Chromacoat Cyan - Shifts from Cyan - Purple - Gold
• Chromacoat Fireball - Shifts from Black - Red - Gold
• Chromacoat Flamingo - Shifts from Purple - Pink - Gold - Green
• Chromacoat Gold - Shifts From Gold - Silver
• Chromacoat Golden Night - Shifts from Gold - Silver - Blue
• Chromacoat Green - Shifts from Green - Blue - Purple - Gold
• Chromacoat Heather - Shifts from Pinky Purple - Blue - Violet
• Chromacoat Key Lime - Shifts from Gold - Green - Blue - Purple
• Chromacoat Peacock - Shifts from Green - Blue - Purple - Green
• Chromacoat Purple - Shifts from Purple - Green - Violet
• Chromacoat Red - Shifts From Red - Gold
• Chromacoat Silver - Shifts from Silver - Green - Purple
• Chromacoat Siren - Shifts from Silver - Green - Blue - Purple
• Chromacoat Smokin Charcoal - Shifts from Dark Purple - Grey - Green - Blue - Violet
  
• Chromacoat Sunrise - Shifts from Gold - Silver - Purple
• Chromacoat Swift Green - Shifts from Green - Blue
• Chromacoat Voodoo - Shifts from Purple - Green

Chromacoat CANZ:

Our award winning Chromacoat is now available in an aerosol can. Chromacoat CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Chromacoat CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Chromacoat is easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat but using different colours will give you a real custom effect. Chromacoat can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Chromacoat 2-1 with Reducer and stir well.
• Apply 2-5 coats of Chromacoat depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Advantage+ 2K MS Clearcoat is an acrylic clearcoat with medium solids content. 

Advantage+ 2K MS Clearcoat can be used over solvent basecoats. It is easy to apply, fast drying and has a good gloss level.

Key Features:

• Easy to apply
• Good gloss level
• Fast drying
• Mixing ratio 2:1
  

Premium Microfibre Cloths - 40x40cm

These Microfibre cloths are a very versatile tool in the cleaning arsenal and are one of our most popular products. They are of high quality and ideal for a wide variety of cleaning tasks including;

Use the cloth dry to collect dust within the fibres, Use damp to collect heavy dirt and then polish off to a shine.

Thread Type choices: Male or Female

Thread Size: R ¼

Flow Rate: 43 cfm @ 100 psi

Maximum Working Pressure: 14 bar / 200 psi

Temperature Range

-40°C to 100°C

Material: Steel

Interchange: Rectus 19, Kee 057 Series, OETIKER SC Series P, Ludecke ESB

Mipa P99 Multi Star Inc Hardener 1Kg 

Especially easy to sand two-component polyester filling putty.     

Hardener included. 

To be applied in order to equalise or close possible pin holes, small irregularities, small paint damages or scratches on the body of cars, vehicles or machines.

Recommended also to be used as a putty and dowel setting material as well as an adhesive for iron, aluminium, zinc, steel and fibre glass substrates.

Colour: Beige

Mini water trap for paint spray guns.

Fit this water trap directly onto the end of the spray gun and it will collect any water and foreign particles in the air supply.

fitted with 1/4BSP thread.

An effective way of making sure there is no contamination in the paintwork.

Max working pressure 70PSI

Description

Technically advanced blending clear that dissolves the edges of clear coats and solid colours, resulting in the perfect finish.

This product can be used with HS and MS coatings.

Ideal for smart repairs when the ability to blend new and existing coatings is required.

 Supplied with 2 different nozzles including the unique Vari-nozzle, giving the user a choice of spray pattern for flexibility.

Key Features

• Durability
• Fast Drying
• Crystal clear Finish
• 500ml

Description

Promatic Stonechip Spray Paint Aerosol Auto Multi Purpose 500ml

PROMATIC Stonechip Aerosol has excellent corrosion prevention and adhesion. This product is resistant against weathering, acids and alkalines. It has long lasting elasticity and noise insulation as well as being overcoatable.

• Excellent corrosion prevention
• Long lasting elasticity
• Noise Insulation
• Excellent adhesion
• Overcoatable
• Resistant to acids and alkalines
• Good weathering resistance

Description: 

NEW Product Coming Soon !!

Candora is here! After years of development Candora is BORN. This product line has been developed to be an alternative to Candy coatings. Candora colours are bright, vibrant and transparent like a traditional Candy effect, but the Candora colours have better UV properties that help them last longer then any other Candy colours on the market. 

Candora colours do not bleed adding another advantage over a traditional Candy colours.

Currently 10 colours available with more in development.

For best performance use Custom Paints Reducer and Mix 2-1

Candora Colours:

• Blue
• Dark Red
• Gold
• Green
• Pink
• Purple
• Magenta
• Red
• Teal
• Yellow

Candora Aerosol Can:

All Candora colours are available in our "Kustom Canz" 400ml and 150ml aerosol can. 

Application:

Candora colours are transparent and require base colour. We recommend using our Base metallics colours but you can be use over other effects for a custom finish.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat Metallic color leaving 10-15 minutes between coats.
• We recommend leaving 60 minutes before applying the Candora colour. Ensuring the Base metallic is fully dry. 
• Stir Candora well before reducing 2-1 with Reducer,
• Apply 3-5 coats of Candora depending on the effect you desire, leaving 15-20 minutes between coats. The more coats, the more deep and richer the color will become. 
• We recommend leaving 60 minutes before applying the 2K Clearcoat. Ensuring the Candora is fully dry.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description

JTAPE Precision Pre-Taped Masking Film is engineered for ultimate accuracy and ease, combining high-quality masking tape with a durable high-density film. It simplifies the masking process, protecting surfaces from overspray, paint bleed and helping you achieve a consistently clean, professional finish.

Perfect for multi-layer painting, the pre-taped design allows for easy adjustment, reducing the need for re-masking, and features a corona-treated finish to prevent paint flaking or dripping to save valuable time and material.

Thanks to its versatility, it’s ideal for detailed work on smaller areas and can also be easily unfolded to cover larger surfaces as needed. Featuring excellent adhesion properties, it can easily be removed, leaving no adhesive residue, and can be used alone or in conjunction with masking tape in scenarios where additional adhesion may be required.

Available in a choice of four convenient widths – 350mm, 600mm, 1200mm, and 1800mm – to suit a wide variety of applications.

KEY FEATURES:

• High-density film provides superior coverage and protection against overspray
• Can be used alone or applied to masking tape for additional adhesion
• Solvent resistant to prevent paint bleed
• Easy to apply and remove, leaving no adhesive residue
• Supplied pre-folded on the roll for convenient dispensing
• Corona treated film provides additional cling and avoids paint flaking or dripping

BEST FOR:

• Covering parts of the vehicle not part of the spraying process
• Automotive
• Painting and decorating
• Aerospace
• Industrial
• Marine

SIZES:

• 350mm x 25m
• 600mm x 25m
• 1200mm x 25m
• 1800mm x 25m

Description:

Candy brings you the ultimate custom effect. For best results we recommend using our Base Metallic Silver Coarse but as Candy colours are completely transparent, they  can be applied over any base colour/effect to create your own unique finish.

Candy colours can be faded into each other and also intermixed to create your very own custom colour.

For best performance use Custom Paints D-Thinner to mix 2:1

Candy Paint Kits:

Candy Kits Will Include:

• Base Metallic Silver (Coarse)
• Candy Colour
• D-Thinner
• 2K Show Clear & Activator

Candy Colours:

• Black Candy
• Blue Candy
• Blueberry Candy
• Brown Candy
• Cherry Red Candy
• Deep Red Candy
• Emerald Candy
• Fools Gold Candy
• Gold Candy
• Green Candy
• Moss Green Candy
• Ocean Candy
• Orange Candy
• Red Candy
• Ruby Red Candy
• Sugar Plum Candy
• Teal Candy
• Yellow Candy

MTVs PIMP MY RIDE UK:

Custom Paints has teamed up with MTVs PIMP MY RIDE UK for series 3. PIMP MY RIDE UK used our Candy Red on the Daimler XJ6. Our Silver and Black Base were used, fading Silver at the front to Black at the back. Candy Red was then applied over the top.

CANDY CANZ:

Custom Paints award winning Candy is also available in aerosol cans. The Kustom canz range gives high output with excellent atomisation and high transfer efficiency with no pressure drop during application. Using our Kustom Canz range can save on time and labour without the requirement of expensive spraying equipment.

To get the best result from Kustom Canz Candy,  we recommend using our Base Metallic Silver Coarse as a ground coat and finishing with our market leading Custom Canz 2K Clearcoat.

Application:

For best results use Base Metallic Silver Coarse but using different coloured basecoats will give you different effects. Candy Colours can also be used with our other products such as:  Shimmer, Pearl, Spectracoat, Sparkle Pearl, Flip Paint etc.

Always spray test panels before spraying your product or project.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of base coat leaving 10-15 minutes between coats. 
• Allow 1 hour (maximum 24 hours)  before continuing to the next stage.
• Mix Candy 2:1 with D-Thinner and stir well.
• Apply 3-5 coats of Candy depending on the effect you desire, leaving 15 minutes between coats. The more coats you apply, the more deeper and richer the colour will become.  
• Allow 1 hour (maximum 24 hours)  before continuing to the next stage.
• Apply 2K Show Clear for a real deep gloss finish.

Description:

Base Pearlz have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl luster!

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1

Base Pearlz Paint Kits:

Base Pearlz Kits Will Include:

• Base Colour
• Base Pearlz Colour
• D-Thinner
• 2K Show Clear & Activator

Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over Blue Waves Base)
• Miami Pink (Best used over Pink Base)
• Monza Red (Best used over Red Base)
• Novak Purple   (Best used over White Base) 
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base) 
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)

Base Pearlz CANZ:

Our award winning Base Pearlz are now available in an aerosol can. CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base Pearlz CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Pearlz coatings are easy to apply and can even be applied with an airbrush. For best results use a White Primer or a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job (Sand, Prime, etc.) in a White Primer or Basecoat specified.
• Apply 2-3 coats of Basecoat leaving 10 - 15 minutes between coats. Leave 60 minutes before applying effect colour.
• Mix Base Pearlz 2-1 with D-Thinner and stir well.
• Apply 2-4 coats of Base Pearlz depending on the effect you desire, leaving 15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply 2K Show Clear for a real deep gloss finish.

Customers Projects:

Base Pearlz Sugar Apple
     

TVR Paint Colours

Custom Paints Ltd can offer a large range of colours for the TVR.

We can offer the hardest to find TVR paints colours !!  If you unable to find your colour, please call us to with the paint code and the name of the colour.

All colours will come as "Standard" Shade unless stated. Other shades available on request. 

TVR Chameleon colours: Best applied over black base coat 

TVR Reflex colours: Best applied over black base coat 

 TVR Spectraflair colours: (Made to TVR Strengh) Best applied over light gray base coat. 

 TVR Nebula colours: Will Require black or blue base coat  

TVR Cascade colours: (Made to TVR Strength) Best applied over black base coat  

TVR Paint Kits:

TVR Kits Will Include:

• TVR Colour
• D-Thinner
• 2K Show Clear & Activator

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire colour required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Candy brings you the ultimate custom effect. For best results we recommend using our Base Metallic Silver Coarse but as Candy colours are completely transparent, they  can be applied over any base colour/effect to create your own unique finish.

Candy colours can be faded into each other and also intermixed to create your very own custom colour.

For best performance use Custom Paints D-Thinner to mix 2:1

Candy Paint Kits:

Candy Kits Will Include:

• Base Metallic Silver (Coarse)
• Candy Colour
• D-Thinner
• 2K Show Clear & Activator

Candy Colours:

• Black Candy
• Blue Candy
• Blueberry Candy
• Brown Candy
• Cherry Red Candy
• Deep Red Candy
• Emerald Candy
• Fools Gold Candy
• Gold Candy
• Green Candy
• Moss Green Candy
• Ocean Candy
• Orange Candy
• Red Candy
• Ruby Red Candy
• Sugar Plum Candy
• Teal Candy
• Yellow Candy

MTVs PIMP MY RIDE UK:

Custom Paints has teamed up with MTVs PIMP MY RIDE UK for series 3. PIMP MY RIDE UK used our Candy Red on the Daimler XJ6. Our Silver and Black Base were used, fading Silver at the front to Black at the back. Candy Red was then applied over the top.

CANDY CANZ:

Custom Paints award winning Candy is also available in aerosol cans. The Kustom canz range gives high output with excellent atomisation and high transfer efficiency with no pressure drop during application. Using our Kustom Canz range can save on time and labour without the requirement of expensive spraying equipment.

To get the best result from Kustom Canz Candy,  we recommend using our Base Metallic Silver Coarse as a ground coat and finishing with our market leading Custom Canz 2K Clearcoat.

Application:

For best results use Base Metallic Silver Coarse but using different coloured basecoats will give you different effects. Candy Colours can also be used with our other products such as:  Shimmer, Pearl, Spectracoat, Sparkle Pearl, Flip Paint etc.

Always spray test panels before spraying your product or project.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of base coat leaving 10-15 minutes between coats. 
• Allow 1 hour (maximum 24 hours)  before continuing to the next stage.
• Mix Candy 2:1 with D-Thinner and stir well.
• Apply 3-5 coats of Candy depending on the effect you desire, leaving 15 minutes between coats. The more coats you apply, the more deeper and richer the colour will become.  
• Allow 1 hour (maximum 24 hours)  before continuing to the next stage.
• Apply 2K Show Clear for a real deep gloss finish.

Description:

An easy to use ultra smooth finishing filler for skimming and fine finishing in thin layers prior to the paint process.

Formerly Top Stop Gold

• High adhesion to multiple substrates
• Ease of application
• Easy to sand

Description:

• True Colour Finish – G10 Finishing Compound acts as a gentle abrasive to bring colour back to discoloured paint surfaces
• Versatile Application – Can be used by hand or machine
• Dry Use – No water is required, reducing splatter and clean up time
• Superior Fine Cut – Ideal for removing light scratches or swirl marks, especially on darker colours
• `Perfect Finish – Quickly provides a high gloss finish and ultimate finish, saving time and money

G10 Finishing Compound is ideal for removing light scratches or swirl marks, especially on darker colours.

It will also restore older paint work and bring the true colour back.

Speedfix 132 Aluminium Oxide 150mm Disc 7Hole (Pkt 50) P40/P80

Lamborghini Automotive Colours

All colours will come as "Standard" Shade unless stated. Other shades available on request.

All colours are reduced 1-1 with thinner.

• Verde Ithaca - Paint Code 0077 Three Stage colour. Price will include Base colour and mid coat.
• Gallio Orion - Paint Code 0056 Three Stage colour. Price will include Base colour and mid coat.
• Ballon White - Paint Code 224.009 Three Stage colour. Price will include Base colour and mid coat.
• Arancio Atlas - Paint Code 0058
• Viola Parsifae - Paint Code 0172
• Verde Mantis - Paint Code Z6A
• Arancio Argos Pearl - Paint Code 0117
• Nero Nemesis Pearl - Paint Code 0109
• Blu Glauco - Paint Code 0123
• Grigio Lynx Met - Paint Code Z7S
• Viola Nebula Pearl - Paint Code 0275

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.  

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire colour required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Clearcoat.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

 Kawasaki motorcycle colours

All colours will come as "Standard" Shade unless stated. Other shades available on request.

• Candy Burnt Orange - Paint Code 17L - Three stage colour. Price will include base colour and mid coat.
• Candy Lime - Paint Code 8N - Three stage colour. Price will include base colour and mid coat.
• Persimmon Red - Three stage colour. Price will include base colour and mid coat.
• Candy Plasma Blue - Three stage colour. Price will include Base colour and mid coat.
• Braun - Three stage colour. Price will include base colour and mid coat.
• Galaxy Silver - Paint Code 474
• White Pearl - Three stage colour. Price will include base colour and mid coat.
• Lime Green
• Diablo Black
• Silver
• Gold
• Terra Blue
• Sapphire Blue - Paint Code 19A
• Sunbeam Red - Paint Code 22

Colours will dry to a flat finish and will require a 2K Clearcoat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Cans for 3-5 minutes.
• Apply 2-4 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying Clearcoat..
• Apply our 2K Show Clear Aerosol Canz for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Cans for 3-5 minutes.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Apply 2-4 coats of mid coat depending on the desire colour required. Leave 10-15 minutes between coats. Leave 60 minutes before applying Clearcoat.
• Apply our 2K Show Clear Aerosol Canz for a Real Deep Gloss finish.

BMW Automotive Colours

All colours will come as "Standard" Shade unless stated. Other shades available on request. 

All colours are Mixed 1-1 with Thinner

• Valencia Orange - Paint Code WB44
• Sparkling Graphit - Paint Code WA22
• Le Mans Blau - Paint Code 381
• Estoril Blue - Paint Code 335
• Techno Violet - Paint Code 299
• Calypso Red - Paint Code 252
• Dark Graphit - Paint Code 919
• Diamond Black - Paint Code 181
• San Mario Blau - Paint Code WB51
• Frozen Silver - Paint Code WW07
• Montegiesschwarz - Paint Code A37
• Monacoblau - Paint Code A35
• Arkis - Paint Code A34
• Pearl Silber 2 - Paint Code 907
• Urban Green - Paint Code YA04
• Highland gruen - Paint Code WA11
• Diamant - Paint Code WA10
• Silbergrau - Paint Code WA08
• MysticBlau - Paint Code Wa07
• Merlorot - Paint Code WA02
• Ontario Gold - Paint Code U57
• Smeraldo - Paint Code S02
• Aurum - Paint Code S01
• Aspen White - Paint Code 899/ NUH
• Malediven Blue 2 - Paint Code A15
• Moccabraun - Paint Code 891
• Sepang Silver - Paint Code WA32
• Interlago Blau - Paint Code WA30
• Cool Blue - Paint Code WA27
• Hot Orange - Paint Code WA26
• Sonara - Paint Code WA23
• Sydney Blau - Paint Code WA19
• Havana - Paint Code WA17
• Mineral Silber - Paint Code WA14
• Atlantic Blue - Paint Code WA13
• Jet Black - Paint Code 668
• Brasilbraun - Paint Code 154
• Sakhir Orange - Paint Code WB50

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

BMW Automotive Colours

All colours will come as "Standard" Shade unless stated. Other shades available on request. 

All colours are Mixed 1-1 with Thinner

• Valencia Orange - Paint Code WB44
• Sparkling Graphit - Paint Code WA22
• Le Mans Blau - Paint Code 381
• Estoril Blue - Paint Code 335
• Techno Violet - Paint Code 299
• Calypso Red - Paint Code 252
• Dark Graphit - Paint Code 919
• Diamond Black - Paint Code 181
• San Mario Blau - Paint Code WB51
• Frozen Silver - Paint Code WW07
• Montegiesschwarz - Paint Code A37
• Monacoblau - Paint Code A35
• Arkis - Paint Code A34
• Pearl Silber 2 - Paint Code 907
• Urban Green - Paint Code YA04
• Highland gruen - Paint Code WA11
• Diamant - Paint Code WA10
• Silbergrau - Paint Code WA08
• MysticBlau - Paint Code Wa07
• Merlorot - Paint Code WA02
• Ontario Gold - Paint Code U57
• Smeraldo - Paint Code S02
• Aurum - Paint Code S01
• Aspen White - Paint Code 899/ NUH
• Malediven Blue 2 - Paint Code A15
• Moccabraun - Paint Code 891
• Sepang Silver - Paint Code WA32
• Interlago Blau - Paint Code WA30
• Cool Blue - Paint Code WA27
• Hot Orange - Paint Code WA26
• Sonara - Paint Code WA23
• Sydney Blau - Paint Code WA19
• Havana - Paint Code WA17
• Mineral Silber - Paint Code WA14
• Atlantic Blue - Paint Code WA13
• Jet Black - Paint Code 668
• Brasilbraun - Paint Code 154
• Sakhir Orange - Paint Code WB50

This colour will dry to a flat finish and will require a 2K Clear coat.

1000's of other colours available, Please contact us with the name and paint code of the colour you require, if you can not see your colour listed.

Paint Application

Application for 2 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear..
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Application for 3 Stage colours:

• Always check colour and spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Mix base coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of Base coat leaving 10-15 minutes between coats. Leave 30 minutes before applying mid coat.
• Mix mid coat 1-1 with Reducer and stir well.
• Apply 2-3 coats of mid coat depending on the desire color required. Leave 10-15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply our 2K Show Clear for a Real Deep Gloss finish.

MIPA CS21 is a 2K (two-component) High Solid (HS) acrylic clearcoat that, when mixed with MIPA SR10 Fast Hardener at a 2:1 ratio (Clearcoat:Hardener), provides a durable, scratch-resistant, high-gloss finish for automotive, motorcycle, and commercial vehicle repairs, working well over waterborne or solvent basecoats and offering fast drying times, even with minimal thinning. 

Key Features

• Type: 2K HS Acrylic Clearcoat (Klarlack).
• Technology: Uses Reflow Technology, applied without thinner.
• Resistance: Excellent resistance to micro-scratches (from car washes) and chemicals.
• Application: Easy to apply, suitable for full or partial repaints, and works over waterborne or solvent basecoats.
• Finish: High gloss level.
• Drying: Fast drying, especially with the SR10 hardener. 

Mixing & Application (General Guidelines) 

• Ratio: 2 parts CS21 Clearcoat to 1 part SR10 Hardener (2:1).
• Application: Apply a 3/4 coat, allow 1-3 mins flash-off, then apply one full coat.
• Flash-off (after basecoat): 10 minutes.
• Drying: Air dry at 20°C (68°F) for 24 hours, or bake at 60°C (140°F) for 30 mins. 

Kit Details

• 7.5 litres (5L CS21 + 2.5L SR5)

Plastic bodied air blow gun.

This handy air blow gun has hundreds of uses in and around the workshops for blowing away dust and foreign particles from the work piece.

This blow gun has a long nose nozzle that makes it great for reaching into hard to access areas.

Effectively clean swarf, dust and other foreign particles from the workpiece prior to spraying, painting or finishing. 

1/4bsp thread.

Max pressure 8 bar (116psi).

Overall length 230mm.

Description

• No edge blending tape for allowing seamless blending of new paint work into old.
• Non-stretch. Temperature resistant up to 110°C/230°F.
• Size: 20mm x 5m Quantity: 1

Description

Etalon SPS System (pack of 50 lid & liners) cup and collar included

All In One Disposable Paint System To Rival 3M PPS1.0 - Features And Benefits

• Can be used in conjunction with the original 3M PPS 1.0 adaptors
• Hard cups and collars support liners from any of the Etalon range, Buy cups from 180ml up to 850ml
• Etalon is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials.
• System enables the painter the ability to consistently spray at 90° to the part, no matter the part orientation (even upside down).
• Reduce solvents by up to 70% from traditional gravity cups
• Simply finish spraying and dispose of the inner liner no need to dispose of the cup and easy to spray multiple colours from the same cup and collar unit without losing production time in hard cup changeouts.

Why The Etalon System Saves You Time And Waste - Keeping You Spraying

Use our hard Etalon Cup & Collar range to support and hold flexible liners in the Paint Preparation System (SPS). It’s available in 180ml - 850ml size and allows the painter to measure, mix filter and spray paint materials easily.

The Etalon system can be used standalone or with the original 3M PPS 1.0 adaptor for extra ease of use. Unlike conventional paint cup systems, our Etalon setup eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because product waste occurs every time that an auto body technician transfers paint through mixing cups and filters. With Etalon SPS, you place the disposable liner within the reusable hard cup. Then simply mix the paint in the disposable liner, snap the disposable lid (with the pre welded filter) in place and attach the locking collar to complete the full system in less than a few seconds.

With just these few simple steps, you're ready to start spraying.

Seam sealer brush with tough white nylon bristles and a comfortable wooden handle for applying all types of brushable undercoating seam sealer and stone chip.

The bristles won't break down or dissolve with the solvent and will allow the user to get the underseal into all the crevices with ease.

Size of Brush: 35x25mm

Overall size: 180mm

5 Brushes per pack

Description

Spray gun Paint Pot, Gravity, 600cc, Male Thread

White plastic 600ml Gravity feed Spray Gun Paint Pot With Male 3/8 Thread

Spray gun Paint Pot, Gravity, 600cc, Female Thread

Plastic 600ml Gravity Feed Spray Gun Pot With M16 x 1.5 Female Thread

Spray gun Paint Pot, Gravity, 125cc, Female Thread

White plastic 125ml Gravity feed Spray Gun Paint Pot With Female 3/8 Thread

Description

Fast drying Brushable seam sealer 0.85Kg for car joints . 

Does not run or peel off, excellent adhesion on metallic, primed and painted surfaces. 

Over paintable.

Product Solvent based thixotropic, flexible sealant for seams and flanges in car body,
baggage compartment, floor area etc.

To be applied by brush.

• Substrates Metal surfaces, old coatings, painted plastics
• Surface preparation Clean, dry and degrease the surface
• Pre-treat metal surfaces with anti-corrosive primer if needed.
• Application Conditions +15°C +35°C
• Drying Skin time: 3-4 mins
• Complete curing after 24hrs
• Recoatable once fully dry

Metal Flake: Solid Flake Colours

Custom Paints Metal Flakes are the HIGHEST grade you can buy, there are ultra thin, easy to smooth out and have outstanding sparkle. Our Metal Flakes are solvent proof and wont fade in sunlight as they have a high uv coating on them. we have had 1000's of customers use our flakes and continue using us all the time. Apply our Metal Flakes over any base colour to produce a real custom effect. The Metal Flake can be added to solvent or water based Lacquers, Clear base coats, Resins and can also be used for Arts n Crafts.

Metal Flake Application: "Dry Flake"

Apply our Holographic Metal Flakes over any base colour to produce a real custom effect but most customers use a black Basecoat. We recommend adding the Holographic Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Add the Holographic Metal Flake to a Clear base coat or lacquer and stir well.
• Apply the Holographic Metal Flake until you get the effect you desire. 
• Apply a Clearcoat until the Holographic Metal Flake is fully covered.

Metal Flake Fx Application: "Paint"

METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
• Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
• Leave 60 minutes before applying a 2k Clearcoat.

Spray Gun Size for Metal Flake:

(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.3 nozzle set-up or larger.

(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.6 nozzle set-up or larger.

(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.

Description:

Euro Clear is a 3-1 Premium 2K Urethane Clear coat is a high solid clear coat formulated to provide easy application, easy polishing, and long pot life.

2K Euro Clear offers an excellent high gloss finish, great flow and anti-sagging properties.

2K Euro Clear is suitable for all top-quality overall, spot and panel finishes. This clear coat resists shrinkage and die back, and retains its glossy appearance whether baked or air-dried and with advanced UV filters and absorbers, your finishes keep their beauty longer.

2K Euro Show Clear Kits:

5 Litres of 2K Euro Clear Kit includes: 

• 5 Litres of Euro Clear.
• 1 x Litre + 700ml Activator

1 Litre of 2K Euro Clear Kit includes:

• 1 x Litre Clear-coat.
• 1 x 350ml Activator.

Substrates & Surface Preparation:

Use over Custom Paints Basecoats and sanded OEM finishes in good condition.

EXISTING FINISH: Sand surface with P600-P800 wet or P500-P600 dry, and then clean with Cleaner/Degreaser. Mask object/area to eliminate unwanted overspray. Use a tack cloth to remove any surface contaminates that may have settled on the basecoat.

Application:

Apply 2-3 coats or 3-4 coats If a heavy flat and polishing is to be a expected. Ensure you leave longer flash times when applying more then 3 coats. 

The mixing ratio:

• 3 parts Clear-coat
• 1 part Activator (Medium or Slow Activators)
• Optional : 5 - 10% Thinner

POT LIFE AT 20°C (68°F):  60 -120 minutes

FLASH / DRYING TIMES:

 Dry and cure times are dependent on air movement, temperature and film builds.

EQUIPMENT CLEANING:

Clean equipment immediately after use according to local regulations.

Protection:

Use suitable respiratory protection (we recommend the use of a fresh air supply respirator).

Lumo CANZ:

Lumo brings you the brightest custom paint finish. Lumo Paint is a high visibility Fluorescent coating in daylight and artificial light. Please remember to pick your application of this product carefully, it has limited lightfastness. USE WITH DISCRETION.

Lumo Aerosol Kit:

• 1 x Base Colour (Base White)
• 1 x Lumo Colour 
• 1 x 2K Clearcoat

There are 5 Lumo colours:

• Green Lumo
• Pink Lumo
• Orange Lumo
• Red Lumo
• Yellow Lumo

Application:

Lumo coatings are easy to apply and for best results use a White base coat. Please remember to pick your application of this product carefully, it has limited lightfastness. USE WITH DISCRETION.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5 minutes.
• Apply 2-3 coats of White Base leaving 5-10 minutes between coats. Leave for 60 minutes before applying the Lumo effect colour.
• Apply 2-5 coats. Leave 5-10 minutes between coats. (Always spray test panels before spraying your product or project)
• For best results we suggest to apply our 2K Clear-coat Aerosol CANZ

Description:

Our Sparkle Pearls are the very best on the planet. Sparkle Pearls exhibit the brightest and most vivid colours due to their large size and give a sparkle effect in bright light/sun light. Sparkle Pearls are like no other pearls on the market as each colour gives off colours within the colour pearl. Apply Sparkle Pearls over any Basecoat colour to produce a real custom effect.

For best performance use Custom Paints Reducer and Mix 2-1

Sparkle Pearl Paint Kits:

Sparkle Pearl Kits Will Include:

• Base Black
• Sparkle Pearl Colours
• D-Thinner
• 2K Clearcoat + Activator

Sparkle Pearl Colours:

• Blue Sparkle Pearl
• Copper Sparkle Pearl
• Fire Gold Pearl
• Gold Sparkle Pearl
• Green Sparkle Pearl
• Purple Sparkle Pearl
• Rainbow Sparkle Pearl
• Red Sparkle Pearl
• Silver Sparkle Pearl
• Super Copper Pearl
• Turquoise Sparkle Pearl

Sparkle Pearl CANZ:

Our award winning Sparkle Pearl is now available in a aerosol can. CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or Spray Gun cleaning.

To get the best result from Sparkle Pearl CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Sparkle Pearl is easy to apply and can even be applied with an airbrush. Apply Sparkle Pearl over any colour Basecoat. Sparkle Pearl colours can also be mixed with our other products: Candy, Spectracoat, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Sparkle Pearl 2-1 with Reducer and stir well.
• Apply 2-4 coats of Sparkle Pearl depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

17 Pc HVLP complete cleaning kit

Content Includes:

• 5 miniature brush set , 1 detail end brush;1 pick up tube brush;1 1/4'' HVLP brush
• 1 cleaning brush;1 nylon bristle parts brush;1 1/2'' body cavity brush;6 precision needle set

Metal Flake: Solid Flake Colours

Custom Paints Metal Flakes are the HIGHEST grade you can buy, there are ultra thin, easy to smooth out and have outstanding sparkle. Our Metal Flakes are solvent proof and wont fade in sunlight as they have a high uv coating on them. we have had 1000's of customers use our flakes and continue using us all the time. Apply our Metal Flakes over any base colour to produce a real custom effect. The Metal Flake can be added to solvent or water based Lacquers, Clear base coats, Resins and can also be used for Arts n Crafts.

Metal Flake Application: "Dry Flake"

Apply our Holographic Metal Flakes over any base colour to produce a real custom effect but most customers use a black Basecoat. We recommend adding the Holographic Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Add the Holographic Metal Flake to a Clear base coat or lacquer and stir well.
• Apply the Holographic Metal Flake until you get the effect you desire. 
• Apply a Clearcoat until the Holographic Metal Flake is fully covered.

Metal Flake Fx Application: "Paint"

METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
• Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
• Leave 60 minutes before applying a 2k Clearcoat.

Spray Gun Size for Metal Flake:

(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.3 nozzle set-up or larger.

(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.6 nozzle set-up or larger.

(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.

Holographic Metal Flake:

Our Holographic Metal Flakes are one of the finest flakes available. They shimmer through a rainbow of colours when viewed at different angles. Apply our Holographic Metal Flakes over any base colour to produce a real custom effect. The Metal Flake can be added to solvent or water based Lacquers, Clear base coats, Varnish and can also be used for Arts n Crafts.

The Holographic Metal Flakes are available in Medium (.008 Hex) and Large (.015 Hex).

Metal Flake Application: "Dry Flake"

Apply our Holographic Metal Flakes over any base colour to produce a real custom effect but most customers use a black Basecoat. We recommend adding the Holographic Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Add the Holographic Metal Flake to a Clear base coat or lacquer and stir well.
• Apply the Holographic Metal Flake until you get the effect you desire. 
• Apply a Clearcoat until the Holographic Metal Flake is fully covered.

Metal Flake Fx Application: "Paint"

METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
• Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
• Leave 60 minutes before applying a 2k Clearcoat.

Spray Gun Size for Metal Flake:

(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.3 nozzle set-up or larger.

(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.6 nozzle set-up or larger.

(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.

Promatic Silver Wheels 500ml Aerosol.

Fast drying product with good spray characteristics. Suitable for internal and external use. Weather resistant, light proof and UV resistant.

Scratch and impact resistant. Excellent surface hardness and good elasticity. Does not require a clearcoat however a clearcoat can be applied to add extra gloss and protection.

Promatic Paint Isolator Primer Spray creates a barrier between old coatings on a surface and a new paint or coating.

Promatic Isolator is a 1K ready for use, quick drying primer / isolator. Helps prevent the lifting and bleeding of old paint which is sensitive to strong solvents.

It can be overcoated with primer after 1 hour. Does not require any sanding.

• Prevents the lifting and bleeding of existing coatings
• Protects against solvent attack
• Does not require sanding
• Can be over coated with single and 2 pack topcoats

Description

1K acrylic primer with high filling power.

Ideal for new parts, fast jobs and spot repairs.

Can be applied on metal, steel, galvanised steel and aluminium. Easy application and sanding.

VOC compliant.

Metal Flake: Solid Flake Colours

Custom Paints Metal Flakes are the HIGHEST grade you can buy, there are ultra thin, easy to smooth out and have outstanding sparkle. Our Metal Flakes are solvent proof and wont fade in sunlight as they have a high uv coating on them. we have had 1000's of customers use our flakes and continue using us all the time. Apply our Metal Flakes over any base colour to produce a real custom effect. The Metal Flake can be added to solvent or water based Lacquers, Clear base coats, Resins and can also be used for Arts n Crafts.

Metal Flake Application: "Dry Flake"

Apply our Holographic Metal Flakes over any base colour to produce a real custom effect but most customers use a black Basecoat. We recommend adding the Holographic Metal Flake to our Flake Carrier but you can add them to a Automotive solvent or water based Clearcoats, Clear basecoats and Resin's. Depending on how heavy you want the flake effect, will depend on how much you will need.

Always spray test panels before spraying you product or project to see the effect you desire.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Base coat.
• Add the Holographic Metal Flake to a Clear base coat or lacquer and stir well.
• Apply the Holographic Metal Flake until you get the effect you desire. 
• Apply a Clearcoat until the Holographic Metal Flake is fully covered.

Metal Flake Fx Application: "Paint"

METAL FLAKE FX is an EASY to apply Metal Flake paint. Metal Flake FX is highly concentrated with our Metal Flake and full coverage can be achieved with in a few coats, which then can be 2K clear coated or be used as a base for our Candy effect paints.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Leave 60 minutes before applying the effect colour to ensure basecoat is fully dry.
• Stir paint well before adding Reducer. Mix Metal Flake Fx 2-1 with Reducer & stir well.
• Apply 2-5 coats of Metal Flake Fx depending on the effect you desire. Leave 20-30 minutes between coats. Ensure its fully 
• Leave 60 minutes before applying a 2k Clearcoat.

Spray Gun Size for Metal Flake:

(SMF) Small Flake is our fine cut flake at .004 x .004 hex. SMF flake size can be sprayed through most large size tip airbrushes, as well as HVLP full and detail sized spray gun equipment with a 1.0 nozzle set-up or larger. SMF lays down much flatter then MMF, LMF and XMF so it's easier to finish with clear.

(MMF) Medium Flake is our medium cut flake at .008 x .008 hex. MMF flake size has a sparkling brilliance that is easy to use. MMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.3 nozzle set-up or larger.

(LMF) Large Flake is our large cut flake at .015 x .015 hex. LMF flake size has double the amount of sparkling brilliance of the LMF and has been used in the custom market for many years. LMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 1.6 nozzle set-up or larger.

(XMF) Extra Large Flake is our extra large cut flake at .025 x .025 hex. XMF is an extreme size flake gives a extreme amount of sparkle. XMF can be sprayed out of HVLP and conventional spray equipment with a minimum of 2.2 nozzle set-up or larger.

Description:

Chromacoat shifting effect changes colour right before your eyes. Chromacoat finishes are based on the revolutionary ChromaFlair Colour shifting colorants. These are unique colorants that offers previously unattainable colour performance, they actually change colour depending on the angle from which they are viewed. More than just a subtle variation in shade, the colour undergoes an almost magical transformation in appearance. On rounded curved surfaces and sharp angles will highlight the magical appearance of Chromacoat.

For best performance use Custom Paints Reducer and Mix 2-1

Chromacoat Paint Kits:

Chromacoat Kits Will Include:

• Base Black
• Chromacoat Colour
• D-Thinner
• 2K Show Clear & Activator
  

Chromacoat Colours:

• Chromacoat Autumn Spice - Shifts from Copper Orange - Gold - Green
• Chromacoat Blue - Shifts from Blue - Red - Gold
• Chromacoat Copper - Shifts from Copper - Blue - Purple
• Chromacoat Cyan - Shifts from Cyan - Purple - Gold
• Chromacoat Fireball - Shifts from Black - Red - Gold
• Chromacoat Flamingo - Shifts from Purple - Pink - Gold - Green
• Chromacoat Gold - Shifts From Gold - Silver
• Chromacoat Golden Night - Shifts from Gold - Silver - Blue
• Chromacoat Green - Shifts from Green - Blue - Purple - Gold
• Chromacoat Heather - Shifts from Pinky Purple - Blue - Violet
• Chromacoat Key Lime - Shifts from Gold - Green - Blue - Purple
• Chromacoat Peacock - Shifts from Green - Blue - Purple - Green
• Chromacoat Purple - Shifts from Purple - Green - Violet
• Chromacoat Red - Shifts From Red - Gold
• Chromacoat Silver - Shifts from Silver - Green - Purple
• Chromacoat Siren - Shifts from Silver - Green - Blue - Purple
• Chromacoat Smokin Charcoal - Shifts from Dark Purple - Grey - Green - Blue - Violet
  
• Chromacoat Sunrise - Shifts from Gold - Silver - Purple
• Chromacoat Swift Green - Shifts from Green - Blue
• Chromacoat Voodoo - Shifts from Purple - Green

Chromacoat CANZ:

Our award winning Chromacoat is now available in an aerosol can. Chromacoat CANZ give high output with excellent Atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labor with no paint mixing or Spray Gun cleaning.

To get the best result from Chromacoat CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Chromacoat is easy to apply and can even be applied with an airbrush. For best results use a Black Basecoat but using different colours will give you a real custom effect. Chromacoat can also be mixed with our other products: Candy, Spectracoat, Sparkle Pearl, Flip Paint, etc.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Apply 2-3 coats of Basecoat leaving 10-15 minutes between coats.
• Mix Chromacoat 2-1 with Reducer and stir well.
• Apply 2-5 coats of Chromacoat depending on the effect you desire. Leave 10-15 minutes between coats. 
• Apply our 2K Show Clear for a Real Deep Gloss finish.

Description:

Base Pearlz have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl luster!

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1

Base Pearlz Paint Kits:

Base Pearlz Kits Will Include:

• Base Colour
• Base Pearlz Colour
• D-Thinner
• 2K Show Clear & Activator

Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over Blue Waves Base)
• Miami Pink (Best used over Pink Base)
• Monza Red (Best used over Red Base)
• Novak Purple   (Best used over White Base) 
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base) 
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)

Base Pearlz CANZ:

Our award winning Base Pearlz are now available in an aerosol can. CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base Pearlz CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Pearlz coatings are easy to apply and can even be applied with an airbrush. For best results use a White Primer or a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job (Sand, Prime, etc.) in a White Primer or Basecoat specified.
• Apply 2-3 coats of Basecoat leaving 10 - 15 minutes between coats. Leave 60 minutes before applying effect colour.
• Mix Base Pearlz 2-1 with D-Thinner and stir well.
• Apply 2-4 coats of Base Pearlz depending on the effect you desire, leaving 15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply 2K Show Clear for a real deep gloss finish.

Customers Projects:

Base Pearlz Sugar Apple
     

Description:

Base Pearlz have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl luster!

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1

Base Pearlz Paint Kits:

Base Pearlz Kits Will Include:

• Base Colour
• Base Pearlz Colour
• D-Thinner
• 2K Show Clear & Activator

Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over Blue Waves Base)
• Miami Pink (Best used over Pink Base)
• Monza Red (Best used over Red Base)
• Novak Purple   (Best used over White Base) 
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base) 
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)

Base Pearlz CANZ:

Our award winning Base Pearlz are now available in an aerosol can. CANZ give high output with excellent atomization and high transfer efficiency with no pressure drop during application. Using our CANZ can save on time and labour with no paint mixing or spray gun cleaning.

To get the best result from Base Pearlz CANZ we recommend using our 2K Clearcoat CANZ. 2K Clearcoat CANZ is the best 2K Aerosol on the market!!!

Application:

Base Pearlz coatings are easy to apply and can even be applied with an airbrush. For best results use a White Primer or a White Basecoat.

• Always spray test panels before spraying your product or project.
• Start by prepping your project as you would any other paint job (Sand, Prime, etc.) in a White Primer or Basecoat specified.
• Apply 2-3 coats of Basecoat leaving 10 - 15 minutes between coats. Leave 60 minutes before applying effect colour.
• Mix Base Pearlz 2-1 with D-Thinner and stir well.
• Apply 2-4 coats of Base Pearlz depending on the effect you desire, leaving 15 minutes between coats. Leave 60 minutes before applying 2K Show Clear.
• Apply 2K Show Clear for a real deep gloss finish.

Customers Projects:

Base Pearlz Sugar Apple
     

Description:

Chrome Coating can give you an outstanding Chrome/Mirror effect with up to 98% reflectivity of real chrome plating. Chrome is a the most reflective coating available and is easy to apply without any special equipment. It can be applied with any high quality paint gun and dries instantly into a brilliant, mirror-like finish.

Chrome can be applied with almost any type of spray equipment from airbrushes to full size HVLP guns. Chrome goes a long way, it is sprayed at 20-40 psi with 10-15% volume exiting the spray gun. Just mist it over the surface until you have a even disposition. To achieve the highest mirror-like reflectivity, lies in the surface preparation of the object you are painting. The smoother, more "glass-like" your surface is, the more reflective the final appearance will be.

Chrome Kits Will Include:

• Chrome
• Black Base
• D-Thinner
• 1K Clearcoat
• 2K Show Clear + Activator

Application:

• The First Step if you've never sprayed this product is to do test samples, or call our help line and get guidance to apply this product correctly, as this will not be sprayed the same as a regular base coat paint.

• 1. Apply a Black Basecoat.
• 2. Allow the Basecoat to fully dry 45 minutes and now you are ready to apply the topcoat 2K Show Clear. (If your surface already has a glass like finish, move to Step 4.)
• 3. Apply 2 coats of 2K Show Clear and allow to dry. NOTE: We Recommend you to wait 36 Hours for all of the tail solvents to evaporate before you can proceed to Step 4. You can now sand and buff if necessary to remove any surface imperfections, you will need to be sure to remove all compounds and wax residues with rubbing alcohol to insure a streak-free surface prior to applying the Chrome.
• 4.  It is helpful that the air temperature of your spray area is at a minimum temperature of 20°C. Spraying below this temperature can slow down process. 
• 5. Begin applying 2-4 coats of Chrome using a dusting effect, a very small volume of material with a substantial amount of air. If you are using an HVLP gun you should be around 20 psi, otherwise use whatever the recommended air pressure is for your gun, remembering to keep the material volume very low.
• 6. Chrome dries quickly. After 10 minutes between each coat; use a very soft polishing cloth and carefully wipe all of the excess dust from the surface, when you complete this step you will notice an improvement in the appearance. Be careful not to buff too hard or you may rub through the chrome. If this happens, repair the area by applying more Chrome to this area, then dust off the newly painted area. 
• 7. Allow the Chrome to (Air dry 30 minutes or Bake 140 F for 15 minutes). Be sure all moisture is removed prior to moving on to the next step.
• 8. You will now apply 1-2 light coats of our1K Clearcoat to the Chrome to "seal" and allow to dry. (Air dry 60 minutes or Bake 140 F for 15 minutes).
• 9. Apply the 2K Show Clear and allow to dry, If you are applying this to a object that will be handled frequently or exposed to the elements you will want to apply our 2K Show Clear.

Spectrum Fx Aerosol Can:

Spectrum FX Custom paints are based on a unique pigment that sparkle and shimmer through the light spectrum when viewed from different angles, rounded curved surfaces and sharp angles will highlight the magical appearance of Spectrum Fx.

Spectrum Fx Aerosol Kit:

• 1 x Base Colour (Base Black)
• 1 x Spectrum Fx Colour 
• 1 x 2K Clearcoat

Available in Silver

Application:

Spectrum FX coatings are easy to apply and for best results use a Black base coat but using different colours will give you a real custom effect. Spectrum FX CANZ colours can also be applied over our other Candy, Spectracoat, Sparkle, flip paint to get true custom effect.

• Start by prepping your project as you would any other paint job. (Sand, Prime, etc.)
• Shake Custom Aerosol Can for 5-10 minutes.
• Apply 2-3 coats of base colour leaving 5-10 minutes between coats. Leave for 30 minutes before applying the Spectrum FX effect colour.
• Apply 1-4 coats depending on the Spectrum FX effect you desire. Leave 5-10 minutes between coats. (Always spray test panels before spraying your product or project)
• For best results we suggest to apply our 2K Clear-coat Aerosol CANZ

Inspire H20 50ml Plastic Bottles with Caps

ProXL Xpress 405 – HS Anti-Scratch Rapid Clearcoat Kit 7.5L

Key benefits of using XPRESS405 HS Anti Scratch Clear Coat Lacquer

• Increased throughput with decreased costs
• High Solids content >40% allows single coat, deep-finishes
• Ease of application
• Premium finish

Description:

Mipa 1K-Acrylspachtel is a fast drying acrylic finishing putty to level minor irregularities, scratches and pores on the surface of body fillers, primers and fillers as well as on GRP or sanded old paintworks.

Furthermore, the thin-layer application provides direct adhesion to steel, aluminium, galvanized steel substrates and to the following plastics: ABS, hard PVC, PC, PS, PA, PP/EPDM, POM and A-PET.

The modified viscosity leads to a more creamy consistency that allows an easy, pore-free application.

Apply only in thin layers.

250g

Overcoatable with all common paint systems.

Description:

Base Pearlz have a massive depth of colour and a shimmering iridescence that leaves other Basecoats looking lifeless, dull and boring! Our Base Pearlz have an extreme amount of Pearl luster!

Base Pearlz come in a wide range of colours. They can be simply top coated or used as a basecoat for our Candy, Liquid, Passion or any of our other effect coatings.

For best performance use Custom Paints D-Thinner and Mix 2-1

Base Pearlz Paint Kits:

Base Pearlz Kits Will Include:

• Base Colour
• Base Pearlz Colour
• D-Thinner
• 2K Show Clear & Activator

Base Pearlz Colours:

• Blue Grape (Best used over White Base)
• Blue Ocean (Best used over White Base)
• Bondi Beaches (Best used over Blue Waves Base)
• Champagne Pink (Best used over White Base)
• Coconut (Best used over Black Base)
• Daytona Beaches (Best used over Mint Green Base)
• Fizzy Pink (Best used over White Base)
• Honey (Best used over White Base)
• Hot Salsa (Best used over White Base)
• Key West (Best used over Blue Waves Base)
• Miami Pink (Best used over Pink Base)
• Monza Red (Best used over Red Base)
• Novak Purple   (Best used over White Base) 
• Orange Fusion (Best used over White Base)
• Oriental Blue (Best used over White Base)
• Peachy King (Best used over White Base) 
• Pineapple (Best used over White Base)
• Pink Fantasy (Best used over White Base)
• Purple Lust (Best used over White Base)
• Purple Surfer (Best used over White Base)
• Purple Velvet (Best used over White Base)
• Sky Black (Best used over Black Base)
• Snow White (Best used over White Base)
• Sugar Apple (Best used over White Base)
• Sunburst (Best used over White Base)
• Tobago Bay (Best used over Blue Waves Base)