Mini air filter and water trap for use with gravity feed spray guns. Fit this mini water trap onto the spray gun to eliminate water from the compressor or airline entering the spray gun and contaminating the paint.

Water can be drained from the trap by a non-return valve at the bottom.

Trap has a standard 1/4BSP male and female thread allowing it to fit easily onto any spray gun or air tool and then onto the compressed air hose.

• Size 90mm
• Max air pressure 140PSI
• 1/4" BSP male and female thread

• High-visibility for added safety around the workshop and on site.

• Manufactured in accordance with EN 5774.

• Features high grade TPR (Thermoplastic Rubber) inner tube and a reinforced PVC outer coating, which remains flexible in low temperatures.

• Fitted with 1/4"BSP female swivel unions.

• Silicone-free for use in the Bodyshop.

Plastic bodied air blow gun.

This handy air blow gun has hundreds of uses in and around the workshops for blowing away dust and foreign particles from the work piece.

This blow gun has a long nose nozzle that makes it great for reaching into hard to access areas.

Effectively clean swarf, dust and other foreign particles from the workpiece prior to spraying, painting or finishing. 

1/4bsp thread.

Max pressure 8 bar (116psi).

Overall length 230mm.

Fast mover Mini Air Regulator with Gauge

Professional Quality

Screw onto the bottom of your spray gun for precise air control. Compact dimensions means that it is unobtrusive during use.

Mini regulator with gauge that reads in PSI and BAR.

Product Code: FMTAR805

The FMT3040 Spray Gun Air Pressure Regulator is a small and lightweight option for an on-gun air pressure regulator.

• This unit is very small (just 32mm) and lightweight (just 100g) and features a glass lens which isn’t affected by the solvents.
• King Pressure Range: 7PSI(0.5BAR) – 114PSI(7.8BAR)
• Size: 32mm long

Wall mounted air filter and regulator with gauge.

2 STAGE BREATHING AIR FILTER REGULATOR UNIT

Ideal for the occasional paint sprayer who wants to protect themselves against toxic fumes in the paint shop.

• This unit is fitted with a gauge and regulator.

  Must be used with and air-fed mask fitted with an activated charcoal filter.

  Filters should be replaced every 3 months.

• Air Inlet: 1/2" (1/4" adapter supplied)
• Air Outlet: 1/4"
• Gauge Range: 0-11 Bar (0-160 PSI)
• Width: 135mm, Height: 238mm, Weight: 2,500g
• Maximum Air Flow: 25CFM
• Air Supply Pressure: 18 BAR
• Regulated Air Pressure: 0-12 Bar
• Maximum Operating Temp: 50°C (Not suitable for low bake booths/ovens)
• First Filtration: 0.01 Micron
• Second Filtration: Coalescing Filter
• Drain: Semi-Automatic